Question about Onkyo TX-SR605 Receiver

1 Answer

Onkyo TX-SR604 provides audio thru receiver but no video on Bravia LCD when satellite receiver signal is sent thru any of the Onkyo HDMI connections to tv, however if I connect up my Samsung DVD recorder same way, I get both audio and video (prior to moving I had both set up as below) Bypassing the Onkyo and making a direct connection between sat and Bravia provides both audio and video, which would indicate an Onkyo problem but that is negated by the Samsung working. Any ideas? O Video Input setup menu on Onkyo is : a. DVD --- b. Vid 1 --- c. Vid 2 --- d. Vid 3 --- HDMI. e. DVD :IN 2 f. Vid 1 :IN 1 g. Vid 2 :No h. VID3 :No

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 643 Answers

Easiest fix is to take all hdmi straight to tv. then come out of tv with optical cable to your receiver. that way what ever your watching will automatically be sent to the receiver thru optical. you even will get dolby dig. also you can have audio from your tv when you dont want to use your surround. keeps receiver on one input also.

Posted on Jul 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can a Onkyo tx sr604 receiver be used as a pre amp?


Yes. You can use the Line Out, or Pre-Amp output into another receiver or amplifier. The receiver or amplifier you use as the amp, will need to have a volume control, as the line output coming from the TX SR604 cannot be varied.

If you have any further questions, please visit my website at audioserviceclinic.com and contact me there.

Thank you.

Jun 06, 2014 | Onkyo Audio Players & Recorders

1 Answer

Onkyo tx-sr604 help


You said you tried hooking the HDMI up directly from the TV to each component, and that worked. How is it usually hooked up - through some kind of switch? I'm not completely understanding your setup here.

Aug 10, 2007 | Onkyo TX-SR604 Receiver

1 Answer

Onkyo TX-SR604: Video in from cable box has taken increasingly longer to display a picture.


I would at least disconnect all units from power for a while and then reconnect to allow the units to reboot.

Oct 30, 2012 | Onkyo TX-SR604 Receiver

1 Answer

Onkyo tx sr604 turns off as soon as i turn it on


Your unit is going into protect mode. More than likely because you have a bad channel. Take a DVM on diode check and test all off your outputs. Once you find the pair that is shorted, you will need to replace both outputs and all of the transistors in that circuit. You will also need to check your low ohm resistors in that circuit as well as your duel emmiter resistor.

May 17, 2012 | Onkyo TX-SR604 Receiver

1 Answer

My Onkyo TS-SR604 has a "power on problem" whereby


Check to make sure the speakers are secure, if everything is fine! the problem is in the audio output ic's in the receiver. This will need a technician to take it further to find out how much the cost will entail.

Jan 11, 2011 | Onkyo TX-SR604 Receiver

1 Answer

I have a Onkyo TX-SR604 Receiver. I get no sound


Hello Fixya customer,

Thank you for your question.

A point to keep in mind here is that Zone II will only feed through an analog source. Since the Video 1 input is using the digital (coax, optical) input that that is your most likely issue.

Thank you for using Fixya, and please let me know if I can firther assist.

May 01, 2010 | Onkyo Audio Players & Recorders

1 Answer

I have surround sound, with aTX-Sr604 Amplifier. How doI adjust the sound?


http://www.devicemanuals.com/guide/AV%20Receiver/Onkyo/Onkyo-TX-SR604-Owner's-Manual-English-TmpnNU56RT.html

Jun 22, 2008 | Onkyo Audio Players & Recorders

1 Answer

No sound from receiver TX-SR604


Make sure that the zone 2 audio source is not digital

Dec 16, 2007 | Onkyo TX-SR604 Receiver

1 Answer

Onkyo TX-SR604


This is not a problem with the onkyo

Sep 23, 2007 | Onkyo TX-SR604 Receiver

Not finding what you are looking for?
Onkyo TX-SR605 Receiver Logo

604 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...