Question about Minolta magicolor 2300W Laser Printer

1 Answer


Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Minolta Master
  • 691 Answers
Re: ERROR #17

According to my information Error 17 means:

CPU error (Interrupt exception)

Therefore I would suggest you take the machine to a repair center and have the main board checked out. This does not appear to be an error you can easily fix at home.

Please rate post as SOLVED

Posted on Nov 09, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Printers is saying that there is a Printer error, and I don"t know what to do. can you help

first thing to try is resetting the machine, unplug it for 30 seconds and plug it back in and try it again, sometimes it will have a glitch which is temporary and resetting it will work. If it still has an error message it should have an error number associated which you can look up in the manual or on line.

Feb 02, 2016 | Cannon Printers & Copiers

1 Answer

Canon i550 error


here is the manual:
Click here to download the setup manual
Click here to download the quick start manual

Once u are at the site enter ur mail id and click start download.

And im further looking to the solution of ur problem.

Don forget to rate me as fixya..

Jan 31, 2008 | Canon BubbleJet i550 InkJet Printer

1 Answer

Paper jam

Hi Fred,
Turn the printer off and on.
Check through the paper paths for any obstructions.
Remove any stuck papers manually.
Disconnect the printer from PC,unplug from power and reboot your PC.
Re-connect printer and start your PC.
Avoid filling the paper feed tray to capacity.
Try printing now.

Hope this helps.Thanks!

Jan 01, 2012 | Printers & Copiers

1 Answer

When I try to print from my Lexmark X1150 it says that the wrong ink cartridges are installed but I am using Lexmark 27 and Lexmark 17 - I thought these were the correct ones - can you advise...

The 17 and 27 cartridges are compatible with your Lexmark X1150 printer. Try to manually wipe the cartridge nozzles with a soft moistened cloth. This will help clean the nozzles from dirts and clogs. Unplug and replug the printer into the power outlet in the wall to reset it. When the printer turns on, reinsert one cartridge first. Close the cover. If no error, open the cover and reinsert the other cartridge. Replace whichever cartridge is causing the error to appear. You can also try to insert a different known working cartridge to determine if the other is faulty.

May 19, 2011 | Lexmark X1150 All-In-One InkJet Printer

1 Answer

I need the instruction booklet for a CLP-325. Can you email me a copy. Thks. Fred.


Is this a Samsung CLP-325? If this is here is the link where you can download the manual. Also for other manual for this printer including the quick install, please clink on the mainlink.

I hope I was able to help you with your concern.

Thank you for choosing Fixya.

Mar 05, 2011 | Printers & Copiers

2 Answers

Hp all in one c7280 error code oxc18a0001 nothing seems to work can not find error code in the manual

Try the above hp support center document. I know that not all errors that pop up on the printer display will be in the manual, but usually the first few characters of an error code point towards the failure.

Jul 26, 2009 | HP Photosmart C7280 Laser Printer

1 Answer

Printer will not work. Error E3

What may have happened is that the Paper sensor is locked down and tells the printer that there is paper in the path (although there isn't any). The paper sensor is a toggle switch and there is a paddle that pushes it down as the paper goes in/out. Look on the right side of the unit ,under the roller assembly. Sorry, but I do not have a service manual for this unit.

Error list :

E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 12, 2008 | Canon PIXMA MP160 All-In-One InkJet...

3 Answers

System error

Go to this link: In the "please enter your question" (gray bar area) type in E000. It will give you three options for resetting the machine. If these don't solve it, you'll need to replace the fuser (fixing) assembly.

Jul 29, 2007 | Canon imageCLASS MF8170C All-In-One Laser...

Not finding what you are looking for?
Minolta magicolor 2300W Laser Printer Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers


Level 3 Expert

469 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides