Canon IP2000 Service Manual

You can clean the waste ink absorber (dirty job) and reset the waste ink counter.
See download links below for service manual and howto:
http://www.hsx.dds.nl/service/iP5000sm.pdf
http://www.hsx.dds.nl/service/iWasteInkTankFull.pdf

Hi

Do you shocked this morning just to find out that Your "Waste Ink Absorber Full" on your Canon Printer? This warning made your printer useless because It cannot printing your works.

You have no money for service or change the waste ink absorber on your Canon. I know it could be very expensive. Don't Worry... I have something that maybe can help your problem. Take it Easy, it's FREE.


Canon Printer Motherboard System, will count how much time you had printing or change the ink tanks. After a couple of times your Canon System (Motherboard on your Printer) will stop your Printer because Canon think you waste ink absorber is FULL. So you need to replace your waste ink absorber to the new one. And It's Expensive For Me. But there is a trick to reset the counter on your Canon printer motherboard;

Step 1: Manual for Service mode (1st method). Using manual way ( but not really effective ), because sometimes your canon will prompt the "Message" again. Here's the trick:
Unplug POWER Cable.
PRESS and HOLD the POWER Button (While Disconnected From The Power Cord).
Connect the POWER Cable (Still Holding The POWER Button).
PRESS The Resume / Stop Button 4 Times while holding the POWER Button.
You'll see the Blinking Led Color keep changing from Orange to Green everytime you press the Resume / Stop Button.
Then Release The POWER Button.
Your printer will turn ON (It should not blinking anymore).
Step 2 : Using Software Tools (Reccomended), It can make your printer Permanent not showing the "Messages" again. Just Download Canon Series Resetter. Here's the Link :

Download Link


Cheer

Hi there

Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)


Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip

All the Best Pineworks

The absorber covers the entire bottom of the printer. You need to remove all covers and then the print engine. The error code can only be reset in the service mode by a canon tech. Cleaning the pad doesn't help.

Hi there try see if this will work

Reset ip2000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

use this link click here
this wil help you in cleaning the waste ink

you can also take halp of the following link

Waste Ink Counter Reset:

Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanent
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
"After service mode Pls use software for permanent reset"



Hope that helps! Should you have any further questions,please feel free to post them here.

P.S. - If you find that the solution/answerI provided led you to, or resulted in a fix, please close the ticket with a FixYa!rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Shaun,

Please click the below mentioned link to visit Canon PIXMA iP2000's manual page:

Canon PIXMA iP2000 Manuals

Thank you

I found it under my ink cartridges in my Canon iP2000 printer. Trying to losten it for cleaning, it came out in my hand, I washed it and replaced it with a tiny amount of glue. After resetting the program, it is working again.

Hi there try see if this will work

Reset ip2000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks