Question about Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

1 Answer

Sprayer arms not spinning

Bosch Exxcel dishwasher I do not think the arms are rotating. Originally had a problem with the pump constantly pumping and timer not going down but now it is squirting up water and noisy but not actually doing a proper wash cycle. All arms and filters have been cleaned.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I know this sounds too simple, but on My dishwasher which is an SHX46b model, the plastic supply arm that comes out of the pump and supplies the upper arm popped out of it's correct position at the base. It is held in place by two dinky nibs. I just popped it back in and voila, pressure was back and arms were spinning.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Lamona dishwasher HJA 8650 lower spray arm wont rotate, water is spyaying out and nothing in place to stop it rotating, can you help?


Sounds like the pump that pushes the water up to the spray arm is going south on you.
Check to see if the pump or any of the piping, or sprayer arm jets are clogged.

Feb 23, 2017 | Dishwashers

4 Answers

Frigidaire Model FDB780RCB0 I am getting water in the machine but it seems the arms are not turning what can I do to get that fixed?


The pump in the dishwasher is supposed to provide enough water pressure to turn the spray arms and make them rotate. The pump is faulty and not giving enough pressure or the arms are stuck.
Try spinning the arms, if they rotate smoothly, you will need to replace the pump.

Aug 03, 2008 | Frigidaire Dishwashers

1 Answer

Bottem spray bar doesnt spin


Check if it rotates freely if you spin it manually.

If there are no jams. Most likely there is not enough water circulation. Pump or motor is not working properly.
It will need to be removed and rebuilt or replaced.

Apr 25, 2010 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

My Bosch Exxcel dishwasher wont clean properly?


the cleaning section is mostly from the circulation pump. is the pump is not working it has to be replaced .go to sears partsdirect.com and check out part first,. this will let you know the prices to fix or replace. then call ten repair person and find the cost to change the circulation pump.

Mar 13, 2010 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

My Bosch dishwasher, S9J1F will not clean things properly, I've changed the arms, cleaned it. I think the arms don't seem to spin properly, (I bypassed the door switch so I could see them spin)I have tried...


not enuff water in it or pump blockage or bad pump impeller. if you ran it with the door open even if the arms didn't turn you should have got drenched is the bottom covered with water about 1 inch deep some times the fill valve screens get clogged and don't let in enuff water if plenty of water in it look for somthing in the pump

Dec 08, 2009 | Bosch Dishwashers

1 Answer

Dishwasher arms not rotating on bosch exxcel


clean the holes in the arm (the arm is removable, usually by turning a small x shaped thing in the middle of the arm), if that isnt enough you can drill 2 small holes in the side, near the end (same sides as the rest of the holes) those holes is usually enough to make the arm rotate again

Nov 14, 2009 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

Not pumping water out


if the dish washer is not pumping out water it could be a motor or a pump issue. the motor attached to the pump forces water up into the sprayer arms and during the drain cycle, this pushes the water out of the dishwasher. The motor and pump is normally under the dishwasher.
check and see if the motor spins. if it spins, then the problem is with the pump ,if it doesn't spin it could be a motor problem or a motor and pump problem.then test and replace the faulty pump or motor . hope this helps

Oct 01, 2009 | Bosch Dishwashers

1 Answer

It is filling and running but the water is not


Could be two different things -- either the pump is not moving water through the sprayer arm, or the sprayer arm isn't free to spin around.
I've fixed one of each in the past year, so either is reasonable.

First, check the easy one -- the sprayer arm.
Open the dishwasher and pull the bottom tray forward so you can reach the sprayer arm.
Reach in and try to spin it around by hand. It should move freely, and if you flick it around, it should spin a full turn around before stopping.
If it's unable to move at all, then look for something stuck like a fork or plastic bag.
If it moves, but very quickly stops spinning, it might be a foreign object or it might need a new sprayer arm assembly. The one I got this year was $38 including shipping.

If the sprayer arm is free and easy to move, then check the water pump:
Start the dishwasher and listen. When it's done filling and sounds like the wash cycle, quickly unlock and open the door.
It shouldn't spray water in your face, but there should be lots of water dripping from the racks and the top (and the dishes, if it's loaded when you do this test!)

If not, then the problem is either a failed main pump or a blocked pump, and the repair will be a bit more money and a lot more time.

If this helps, be sure to click the thumbs-up to tell me so!

Sep 01, 2009 | Maytag Dishwashers

1 Answer

Dishwasher Repair


It could be a motor or a pump issue. The dishwasher has a motor that attached to a pump which forces the water up into the sprayer arms and during the drain cycle, it pushes the water out of the dishwasher. The motor (and pump) located beneath the dishwasher. Check if motor spins. In case it spins, the problem is with the pump ,in case it doesn't spin it could be a motor problem or a motor and pump problem. Good luck

Sep 10, 2007 | Dishwashers

1 Answer

Bosch Dishwasher


the spray arms are rotated by water coming out of angled jets, this water being forced round by the main circulating pump. suspect it may a fault with this pump

Mar 23, 2007 | Bosch 24 in. SHX99A15UC Stainless Steel...

Not finding what you are looking for?
Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...