Regards from Mexico, I bought a broken MTX THUNDER 4200X and someone already tried to fix it, I need schematic diagram and parts list to repair it. Some transistors have already been replaced but I do not know which are the correct parts.
Thank you in advance!
i have a performance teknique PT500.2 amplifier, i want to know if this amplifier and the...
(More)
i have a performance teknique PT500.2 amplifier, i want to know if this amplifier and the performance teknique icbm 771 are the same, i think so because they have similar specifications. i connected 2 sub jbl p1200 wich are 5ohms impedance. but the amplifier only give me 100WRMS per channel, the amplifier could give me 240 W RMS bridged in mono but i want to know if in serie connection (10ohms) it could damage any part of my sistem. so what if i connect the subwoofers in paralel bridged plus one 1.5ohms resistance?
I have a Kicker ZR360 CLASSIC AMP that puts out very little sound until I push on the crossover...
(More)
I have a Kicker ZR360 CLASSIC AMP that puts out very little sound until I push on the crossover module. Is something wrong with the crossover module or a connection on the amp itself?