Question about UPS Battery Backup Systems

1 Answer

Can't load a software Essentials 2.0

I inserted the CD into the computer and it does not give me any instructions, or install the program in my GT5405E Gateway computer.
I cannot find a Run or Install link (as in other computers that I had) and I can find no way to get this new program of software into my computer!
Can you advise me on the procedure for installing this software?


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 47 Answers
Re: Can't load a software Essentials 2.0

Go to Start, My Computer, then you should see your software in that window, double click on it. If it's not there let me know, because you have other issues you'll need to deal with.

Posted on Nov 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I just plug a USB dongle Bluetooth into the computer so i can access my phone and it does not download, what do i do?

Take the cd came with bluetooth insert it into drive and install it. complete the instsllation then open the blue window and bring the arrow on different option select internet option keep mobile near computer then select search option computer will search phone ane will give massage after faund out and phone will show display the press any password on mobile and same on the computer then open the internet

Mar 12, 2010 | UPS Battery Backup Systems

1 Answer

Nldtr missing

Am I right in thinking you mean NTLDR and not NLDTR? If so here is the fix.

To fix the error on startup of NTLDR is missing in Win XP you should follow the steps below using a full version Win XP CD and the Recovery Console.
Insert the Windows CD and start the computer making sure the computer boots to the CD first.
When the Welcome to Setup screen appears, press R. (this may take a while to load)
Type a number corresponding to the Windows installation you wish to repair (usually 1) and press Enter. When prompted, type the administrator password and press Enter. (if no password was entered on you system then just press enter)
From the command prompt you want to copy NTLDR and NTDETECT.COM from the i386 folder of the CD to the root folder of the hard drive. This is much easier than it sounds and can be done by typing the commands below.
In the examples below C: is presumed to be your hard drive and D: is presumed to be your CD drive. You will need to change the drive letters to your own if you have more than one drive. ( if you are having problems entering \ then try pressing the # key to see if that works)
Type these 2 commands exactly and press enter after each one.
Now remove the Windows XP CD from the drive and restart the computer and your computer should now start normally.

Apr 22, 2009 | IBM Tripp Lite OfficePro 700 (10K1912) UPS...

7 Answers

Moser baer 4 GB pen drive is not working

i have 4gb moserbaer pen drive when i inserted it in to the Xp system it give the message "Insert disk"
plz. solve this problem.

Aug 05, 2008 | UPS Battery Backup Systems

1 Answer

Laptop will not go wireless nor will it install antivirus software

check the control panel to see if you have any virus software installed

to check the control panel
go to start , settings , control panel , on control panel , click on add or remove programs and look for any virus protection software and remove it
If it works , that means that the virus protection software has a security settings that you will need to configure.
If you need help on the software you will need to contact the manfacture of the software.

Thank you

Jun 04, 2008 | UPS Battery Backup Systems

1 Answer

PC Camera Software

what is you brand? i;ll help you

May 21, 2008 | UPS Battery Backup Systems

1 Answer

Monitoring the Votage in the battery of a RBC2 APC battery in a BP500UC

No remove the old program first always. Then reinstall. Make sure you have device no plugged in.

Feb 13, 2008 | UPS Battery Backup Systems

1 Answer

Printer set-up

Go to this link and then to the support section. You then need to find the software for your specific model of printer. this is the same or maybe updated software that came with your printer.
Before you run this software go into add remove programs on your computer (this is done through the control panel) and make sure that all software that has anything to do with Lexmark is um-installed. run the program from the website and your problem should be solved. As a Little side note, if the printer connects to your computer with a USB cable then make sure the printer is physically disconnected from the computer before running the program from the web site.
Hope this helps

Dec 17, 2007 | UPS Battery Backup Systems

1 Answer

Installation for canon pixma ip 1500

Hey you again, you rated me yesterday Inappropriate. Actually, fixya expert afraid to give some solution because you will rated us Inappropriate even the problem is came from you where you was not clearly stated your problem.

Ok, but anyway I am still to help you, Is it the problem goes to the manual installation you need or the driver instead?

Printers used to be the bugbear of computer users. They were difficult to set up and ornery in operation. That's no longer the case and it's likely you'll have no problems getting your printer up and running. This is particularly the case if your printer comes packaged with your computer system or if you stick to well-known brands such as Hewlett-Packard, Epson, Lexmark and Canon.
Connecting a printer involves four steps:
  1. Unpacking your printer, removing any packaging material and installing the ink or toner cartridge. Refer to your printer's instructions to guide you.
  2. Connecting the printer cable to the printer and to the back of your computer.
  3. Connecting the printer's power cord to a power outlet.
  4. Installing the printer driver and any additional software. The printer driver is a piece of software that tells your computer how to interact with your printer.
If your printer comes as part of your system, you may find that its driver is already installed. In that case, all you'll need to do is unpack it, connect the printer cable and power cord and switch on your computer.
geekgirl.tip: Get a cable One word of warning: Make sure you purchase a printer cable! Often, this is not included in your computer system, despite it being an essential item. You'll need the correct type of cable for your printer: If it's a USB-enabled printer, you need a USB cable (note, the new USB 2 cables work with older USB 1 printers, too; so if in doubt, get a USB 2 cable); if it's a parallel printer, you'll need a parallel cable.
Make sure you get a cable long enough to reach easily from your printer to your computer. However, you should avoid cables longer than 10', because long cables can cause problems with communication between printer and computer. Try to position your printer so a 6' (or shorter) cable can make the connection.
Follow the wizard If your printer's software has not been pre-installed, read any installation instructions that accompany your printer and follow those instructions. If no instructions are provided, follow this procedure:
(Note: This procedure applies to printers which use a parallel connection. If your printer uses a USB connection, you should connect it while Windows is running and it will be recognised.)
  1. Make sure you have your original Windows CD-ROM handy. You may need it.
  2. Switch the computer off.
  3. Connect the parallel printer cable to your computer.
  4. Connect the printer's power cord to a power outlet.
  5. Switch on the printer and the computer.
  6. In most cases, Windows will detect that you've attached a new hardware device and it will launch the Add Hardware Wizard and attempt to search for the appropriate software. If the wizard doesn't launch and Windows appears to ignore your printer, you can launch the Add Printer wizard yourself by clicking the Start button, selecting Control Panel, clicking Printers And Other Hardware, and then clicking Add Printer.
  7. If the printer is directly connected to your computer, select the Local Printer Attached To This Computer option. If you will be connecting to the printer via a network connection, select the Network Printer option, then click Next.
  8. The wizard will first try to search for any Plug and Play devices (these are components that should, by rights, automatically notify Windows when they're first connected). If the wizard discovers your printer, it will display further instructions to complete the installation. You may need to restart your system to finish.

Nov 23, 2007 | UPS Battery Backup Systems

1 Answer

Installing printer

Did you just delete the files or did you uninstall the software? If you just deleted them, you may have to use a registry fixer.
Make sure that the last one was uninstalled first using Add/Remove programs. You should also delete all Temp files too.
Hopefully this solves the problem, if not you can download the latest software from the Canon site.

Nov 20, 2007 | UPS Battery Backup Systems

Not finding what you are looking for?
UPS Battery Backup Systems Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top UPS Battery Backup Systems Experts

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides