Question about Maytag Washing Machines

1 Answer

Maytag MTW5620T2 the fabric softner despenser doesn't despense. There is mositure inside and it slings fabric softner everywhere. It leaks from the side hole of the agitator. Gets fabric softner on my clothes. The top of the drum always has fabric softner all over it. And fabric softner still inside the dispenser

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

Liquid Softener was clogged up over time.
1-Put hot water in the place of the Softener slowly and let it over flow to dissolve the solidified liquid.
2-Keep doing this until you see water at the bottom of the tub.
3-Run a small load to clean out the gum.

Posted on Jul 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The detergent dispenser want despense the fabric softner


Hello. This is a common problem due to the fact that fabric softener collects in the dispenser and gums it up. Begin with an empty washing machine. Add two cups of vinegar to the fabric softener dispenser and then run the machine on the maximum water and hottest water setting. Once the cycle is complete check it out. It will be as clean as a new machine. If this treatment didn't completely clean out the dispenser, repeat the cleaning a second time with two more cups of vinegar. regards, Joe
ps - kindly rate my answer as helpful. Thanks.

Feb 10, 2010 | Washing Machines

1 Answer

Fabric softener does not despense


may be the dialer is not working to that function

Dec 10, 2007 | Samsung WF337AA Front Load Washer

1 Answer

Fabric softener dispencer not working properly, we are getting softener stains on our clothes. at the end of the cycle, there is undiltued softener in the bottom of the drum.


I just had this problem with our 5 year old Atlantis. The key I found was to lift the fabric despenser off. Then you will need to clean it really well. It get builfd up of the Fabirc softner over time. You wil also need to clean the interior of the agitator which will be easy after you have the dispenser off. I used a flat head crew driver and light scraped all the "Gunk" off the inside of the agitator. Take your time and get it as clean as possible all the way down to the bolt that hold the agitiator on. After you are all clean run a hot water load and disefect with a bit of bleach in the dispenser. Put the agitator back on and it should be solved. You will be amazed and possibly grossed out at how much stuff you clean out of it.

Feb 09, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Water is coming from soap despenser during rinse cycle, I think it maybe a clogged hose .


oull out the drawer and see if the pipe that is under the fabric softner dispenser compartment cap is all pligged up if so just clean it out w/ warm water

Feb 06, 2010 | Samsung WF337AA Front Load Washer

1 Answer

Maytag Neptune Washer model # MAH9700AWW will no longer despense fabric softner,


yes the cup that the fabric softner goes into the cap of it is called the syphon. poor water in the cup and go over the max line does it syphon the water?

Jan 30, 2010 | Maytag Washing Machines

1 Answer

Bleach and fabric softner despenser liquids not being used.


You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Feb 25, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

GE Front Loader will not despense Fabric Softener


We checked the cold water line that goes into the washer, it had some pretty nasty stuff in it, and once we cleaned it out, and soaked it in CLR, it cleared up the line. Once we reattached it and ran a cycle, it went great. I am assuming with the line being clogged it didn't have enough water pressure to flush out the fabric softener.

Apr 27, 2008 | GE Energy Star WCVH6260F Front Load Washer

1 Answer

MAYTAG TOP LOAD WASHER MODEL PAVT244AWW, STRING FROM A CURTAIN IS CAUGHT IN THE AGITATOR. HOW DO I REMOVE AGGITATOR TO GET STRING OUT?


remove the fabric despenser from the top of the agatator, under the despenser is a 1/2 inch bolt, a ratche with a 6 inch extention works well, remove the bolt and the agatator will lift up off the transmission shaft

Apr 12, 2008 | Washing Machines

3 Answers

Fabric softener does not despense


clean the water filter in the back of washer. Look up inside of water inlets you will see water filters in cold and hot inlets. Pull stright out with a pair of pires and fush with water.

Dec 10, 2007 | Samsung WF337AA Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...