Question about Lands Phones

1 Answer

How do you record outgoing message?

Lucent digital answering machine 1854

Posted by on

  • carosuel Jul 02, 2009

    I have tried that, but the generic outgoing message still plays. Can the recording mechanism be malfunctioning?

  • Anonymous Mar 29, 2014

    the answering machine has stopped recording messages. All settings have been verified and I have unplugged and repowered the system several times, and gone thru the steps outlined in the owner's manual. Any ideas?

×

1 Answer

RECORD AN ANNOUNCEMENT
1 Prepare your announcement. Each
announcement can be up to 4 minutes long.
2 Press A.
3 Press and release S until you see
the letter of the announcement you want
to record (A, B, or O).
4 Press R. Begin speaking after you
hear the beep. Speak in a normal tone
of voice, about 9 inches from the
microphone.
5 Press S. The system plays your new
announcement. To hear the announcement
again, press P.
6 Repeat Steps 3 to 5 to record another
announcement, or press S.


To assign an announcement to play:

SELECT ANNOUNCEMENT CALLERS HEAR
1 Press and release F until the screen
displays ANNC.
2 Press and release S until the screen
displays the announcement you want
callers to hear (A, B, or O). If you
select AO, you must record an announcement,
as instructed in “Record an
Announcement.”
3 Press S to return to the message display

Posted on Jul 02, 2009

  • Anonymous Jul 07, 2009

    If you recorded the announcement, did you select the announcement to play?

    To assign an announcement to play:

    SELECT ANNOUNCEMENT CALLERS HEAR
    1 Press and release F until the screen
    displays ANNC.
    2 Press and release S until the screen
    displays the announcement you want
    callers to hear (A, B, or O). If you
    select AO, you must record an announcement,
    as instructed in “Record an
    Announcement.”
    3 Press S to return to the message display


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get messages from remote location


To use your system from a remote telephone, you must first enter a 3-digit remote operation security code. The security code label is located on the bottom of the system.

1. Dial your phone number.

2. When your outgoing message is playing, enter your remote operation security code. Bd appears on the display to indicate the system is in remote mode.

If there are no new messages, you hear three beeps.
These are the remote codes available to you:

2 # Play all messages.
2 5 Play new messages.
3 # Delete all old messages.
7 # Record new outgoing message.
7 # Stop recording outgoing message.
8 # Record memo.
8 # Stop recording memo.
9 # Turn system off/on.
0 # Monitor the room..

Jun 12, 2011 | Radio Shack 3822 Digital Answering Machine

Tip

Remote access for machine



This come from a previous model than I have (mine is a ol5870), but seems to work for this one in retrieving messages from another phone.

Default access code is 0000 if you haven't changed it (but you should); when answering machine answer dial in the 4 digit code while the outgoing message is playing.

Once in dial 1,2, or 3 to play messages (mail box number I believe)

You can dial * for a help menu

4 Repeat a message
44 Ignores a message (message won't remote retrieve next call)
6 plays next message (skip to next)
7 Deletes message
8 Lets you record a memo
9 Let's you change the outgoing message (5 stops the recording)
0 Toggles answer on/off

I hope this helps some people at least in part.

on Feb 14, 2009 | Olympia OL5870 Digital Answering Machine

1 Answer

How do i record my own message


Recording Outgoing Messages:


1. Hold the ANNC-DAYand speak clearly into the microphone.

2. Release the ANNC-DAY when you finish. Your answering machine beeps and automatically plays back your recorded message.

Message limit:
60 seconds

To re-activate pre-recorded message:
Press "delete" during while playing your outgoing message. The pre-recorded message is now activated.

Feb 21, 2011 | Radio Shack (43-3829) Digital Answering...

1 Answer

How to record an outgoing message on Radio Shack answering machine, cat. no. 43-3825, serial number 40318384.


Hi, to record an outgoing message:

- Press and hold the ANNC/DAY/<< button. - While you're holding it down, say your outgoing message. - Let go of the ANNC/DAY/<< button to end the recording when you're done.
Your message can be up to 1 minute long.

Nov 28, 2010 | Radio Shack 3822 Digital Answering Machine

1 Answer

I need to change the message and do not remember how on my Lucent Tech. 1710 machine. How do I do it?


Hi you can try these steps: An answering machine is a device which will answer the phone on your behalf after a certain number of rings. It will play a recorded message for your callers before it is ready to record their message. You can use the manufacturer's preset automated message or you can change it by recording your own outgoing message.

  • Compose your message ahead of time. If not, you may end up stumbling, looking for the right words while you are recording your message or leaving out some important details. Composing your message before you begin recording will save you from having to record several messages before you find one with which you are satisfied.
  • Step 2Make it easy for your callers to listen your message. Record your message in a relatively quiet room without background noise. Speak loudly and clearly. For the benefit of callers who don't have much time, make your message as brief and to the point as possible.

  • Jul 28, 2010 | Office Equipment & Supplies

    1 Answer

    Nseed to reset message on answering machine


    There are two models - The TRU8885 and the TRU8885-2 -
    For the TRU8885 the manual PDF form >>>Click Here<<<
    The solution is on page 24 + 57 It starts on Pg 24 as...

    Record Greeting allows you to record a personal outgoing message (greeting) which
    the answering system automatically plays when you receive a call.

    1) Enter the Answring Setup menu, and then the
    Record Greeting sub-menu (see "Entering the
    Menu" on page 16). To record greeting press
    [STA RT] appears.

    2) Press the START soft key. You will hear “Record Greeting.“ The message counter
    displays 30 and then begins to count down.

    3) Position yourself near the base microphone and record your greeting.

    4) When you are finished recording, press the STOP soft key. Your greeting will
    playback for confirmation.

    Selecting Your Greeting (Base only)

    Select Greeting allows you to choose between the two outgoing messages, a prerecorded
    message or your own greeting.

    1) Enter the Answ. Setup menu, and then the
    Select Greeting submenu (see "Entering the
    Menu” on page 16). P lay back greetin g
    appears, and the current outgoing message is
    played. LCD is an example if you recorded your greeting.

    2) Once you have recorded a personal greeting, press the CHANGE soft key to
    choose the greeting. The selected outgoing message is played. Each time you
    press the CHANGE soft key, the phone switches the outgoing message between
    the prerecorded and the personal outgoing message.

    There is more on the PDF - Just ask if you need more

    For the TRU8885-2 is essentially the same. The manual PDF form >>>Click Here<<<

    If we need to dig further, just ask! :) We are just a mouse click away!
    Thanks
    Len

    Mar 07, 2009 | Uniden TRU8885 Digital Answering Machine

    1 Answer

    Radio shack 43-3829 answering machine


    Well, your machine might be broken, or you haven't set the little switch on the unit to ANS. The switch is on the side of the machine where the cables come out. But here are the instructions from the manual:

    Recording Outgoing Messages:

    Your answering machine has a built-in outgoing message, "Hello, please leave a message after the tone." You can use this message or record your own.

    1. Hold the ANNC/DAY/<<, and speak clearly into the microphone, no more than 10 inches away.

    2. Release the ANNC/DAY/<< when you finish. Your answering machine beeps and automatically plays back your recorded message.

    *Your outgoing message must be between one and 60 seconds.

    *If you record your won message but wish to revert to the pre-recorded message, press DELETE during playback of your outgoing message.

    Nov 09, 2008 | Radio Shack 3825 Answering Machine

    1 Answer

    Greeting message


    To Record Outgoing Message on Radio Shack’s Answering Machine [Model 43-3829]:

    Press and Hold the ANNC/DAY/<< button. You’ll hear a beep; continue to hold down the ANNC/DAY/<< button and record your message. When recording of your [outgoing] message is complete, release the ANNC/DAY/<< button. Your message will automatically play back for you.

    Please let me know if you have additional questions. Thanks!

    Take care,
    Gail :-)

    Sep 17, 2008 | Radio Shack (43-3829) Digital Answering...

    1 Answer

    Change Answering Machine message in Lucent 1872 corded phone


    Try just pressing down on the greeting button on the answering machine, you will hear the lady say "record greeting" and keep holdong down until you are finished recording the message. When you are done, remove your finger, done!

    Nov 19, 2007 | Lands Phones

    3 Answers

    Lucent Digital Answering Machine Model 1715


    If you search for an AT&T Digital Answering machine model 1715, you will be sent to a free service with an abreviated manual.

    Oct 08, 2007 | Lands Phones

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    270 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Are you a Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...