SOURCE: horizontal line in top screen
could be vertical output IC or capacitors located close around the IC
SOURCE: philips tv 27PT6441/37 horizontal lines about 3in wide on top of the screen.
I'm having the same issue with this TV! From the top of the screen to
about two/three inches below there are thousands of horizontal lines with a
whitish tinge which seem to be reflecting what is just below these lines! I’ve
never seen this issue on any TV ever! From what I am seeing now is that many
people are having this issue and more! We should put a class action lawsuit
against them! If anyone knows anything, please post the info. Many tech forums
are loaded with issues for these TV’s but this issue seems to be prominent!
My mom had two Phillips TV’s; one just under two years, and the other
just under a year and Phillips refused to fix either without a large expenditure
on her behalf. She told me never to buy Phillips and I should have listened. Phillips
used to be a great company so I don’t really know what has happened? This was a
TV for my Grandmother and it wasn't at a bad price not to mention the picture
was great albeit severely over scanned.
As for her TV, we had it about two weeks over a year and Phillips said there
was nothing they could do! They said they would pay for the cost to replace the
tube if I took it to one of their dealers but they said the cost to bring it there
and repair would fall on me! Also if the issue was not related to the tube I
would have to pay everything OOP! The lady laughed on the phone and said even
if it had been under six months or under a year they would still only pay to
fix the parts and everything else would cost me! WTF?
The moral of the story is NEVER BUY PHILLPS/MAGNOVOX EVER! You might be
getting the TV deal of the century but it is not worth it in the long run. I originally
thought my mom was nuts, but now looking back considering the issues others are
having, and realizing the **** poor way Phillips support deals with ALL
problems, they’re simply not worth the money or trouble. I WILL NEVER buy another
Phillips, Magnavox, or Funai product ever again, whether it is a TV, clock, DVD
player, and/or ANY electronic device! If you do you HAVE BEEN WARNED and WILL
BE SORRY!
SOURCE: My 27
It has gone into a self protect mode where it will shut down because you have a fault in the frame stage of the TV (horizontal line). This will most likely be a failure of the frame output IC. Replace this & you should restore the normal picture.
SOURCE: Picture displays horizontal roll
It's the Satellite Disk that is the problem. Just call the guy..
you can also try to unplug and plug it back in.
37 views
Usually answered in minutes!
×