Question about HP Officejet 5610 All-In-One InkJet Printer

2 Answers

After replacing the ink cartridges and placing the alignment page on the scanner glass it is hung up on aligning cartridges. officejet 5610 all in one product.I have restarted this whole procedure. Took out the cartridges,and waited for new alignment page to print. Still just sits at the message alingning cartridge please wait. ideas appreciated

Posted by on

  • 50yrnewbie Jul 05, 2009

    Thanks Maveriksasha.
    What I finally figured out is that the bulb is out on the scanner/copier. Now I need to figue out if this is worth replacing or junk the whole box.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 102 Answers

Hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....

after replacing the ink cartridges and placing the - 733bedd.jpg8d0783d.jpg

http://www.hp.com/printer/prob676ijt65/solution

ab39

Posted on Jul 17, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Please check if all the wires are conneced properly and repeat the procedure again

Posted on Jul 04, 2009

  • maveriksasha Jul 25, 2009

    yu can replace it..

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 7210 rinter will not align properly


Hi Melvin,

This could be due to faulty, low ink level or Scanner glass not clean.

Remove the cartridge and Clean the electrical contacts ( tiny golden contacts ) with lint free cloth. Open the scanner glass and wipe the glass for any dust particules.
Turn off the printer ( without cartridges )and turn on. It should prompt you to install cartridges for alignment.

You can also try cleaning Cartridges from Front panel

Press Setup button ( menu button )
Scroll to Tools - Press ok
Check for Clean Cartridges/Printhead - Press OK
IT will clean the cartridge contact and print the alignment sheet which you need to place face down on the scanner glass and press OK

Regards,
Sean

Apr 21, 2013 | HP 7210 OfficeJet All-In-One Printer

1 Answer

I have a 5610 all in one printer and when I just put in the new cartiges it gives me an error message stating "Cartige not aligned".


Issue
The instructions displayed on the computer screen during the Print Cartridge Alignment are incorrect. If the printed alignment page is placed on the scanner glass and the Scan button is pressed as instructed on the computer screen, the all-in-one will beep and the control panel display will indicate Busy . The all-in-one will not align the print cartridges.
Workaround
The instructions on the printed alignment page or the all-in-one control panel display are correct. Follow the instructions below: Place the alignment page on the scanner glass and then press the OK button on the all-in-one to complete the print cartridge alignment.

Mar 04, 2011 | HP Officejet 5610 All-In-One InkJet...

1 Answer

My printer window on the HP PSC 2175 continues to read: 'Press Enter to align cartridges' I have done this 5 or 6 times and the message will not go away. How do I fix this problem so it will print?


Perform the following steps to align the ink cartridges:
  1. Disconnect the power cord from the unit, wait five seconds, and then plug it back in. This will reinitialize the unit.
  2. Print another alignment test page. If the Press Enter to align message is not currently on the front panel display, complete the following steps to print an alignment page:
    1. Press Setup or Menu on the front panel (depending on the model).
    2. Press the right arrow button (>) until Maintenance or Tools is displayed, and then press Enter or OK (depending on the model).
    3. Press the right arrow button (>) until Align Print Cartridges is displayed, and then press Enter or OK (depending on the model).
  3. To determine if the automatic alignment is functioning correctly, look into the output tray as the alignment page is printing; a blue light should be visible periodically on the page as the cartridges move back and forth. If this light is not visible, the product will not be able to align the cartridges and will require service. Service the product.
  4. If the blue light is visible and the alignment pages are printing correctly, but the alignment pages still fails, there still may be a hardware problem with the unit.
    • If there are no other printing problems and you wish to continue, use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. The information from last successful alignment will be used.
    • If the message keeps reappearing or other print quality problems occur, service the product.
Models with a semi-automatic print cartridge alignment Some HP products have a semi-automatic alignment process. These models do not have an additional sensor and will print two pages for the alignment process instead of one. The alignment page must be placed on the scanner glass or into the automatic document feeder (HP Officejet V series) and scanned.
  1. Disconnect the power cord, wait five seconds, and then plug it in. This reinitializes the product and forces the scanner to calibrate again.
  2. Examine the scanner glass and white scan backing. Clean the scanner glass and scan backing if they are not clean. To clean the scanner glass and scan backing, use a soft cloth towel slightly dampened with clean water.
  3. With the product turned on, open the scanner cover and check the bulb assembly. If the scanner bulb is not lit, the product must be serviced.
  4. Verify that the alignment page is placed correctly on the scanner glass or in the ADF (if the product has one). Place the printed side down.
  5. 5. Make a copy of the alignment page. The unit will make a copy even if the alignment message is displayed. Compare the copy to the original. If vertical lines appear in the copy, check to see if the scanner assembly requires cleaning. If cleaning the scanner assembly does not correct the problem, service the product.
  6. 6. Use the information in the Bypassing the ink cartridge alignment section below to bypass the alignment. Operate the HP All-in-One to determine if there are other problems. The unit should be serviced if other error messages or problems occur or if alignment problems occur every time the ink cartridges are changed.
To bypass the ink cartridge alignment: Press and hold the Setup button, and then press Options (or Copy Options ).

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Jan 26, 2011 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

I am aligning paper after inserting an ink cartridge. However after printing the alignment sheet and putting it under scanner glass it says "Alignment failed or no alignment paper present" help?


Hi

In order to have a succesfull alignment You need to have
good quility of printing
Replace and the other cartridge or try cleaning it frmo maintance menu
on your printers menu

But you have alwaeys the choice to cancel allingment by pressing cancel button


Pls Vote us to keep us alive

Nov 16, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

I just added new ink in my HP Officejet 5610. The


check expire date
your have clog printhead try cleaning from printer menu
and if it still not alligne s*ck the old ink from the cartridge and refill it with fresh ink
check here how

utube.png You-Tube video "sOriLrbuBao" placeholder (do not delete) utube.png

utube.png You-Tube video "II9gpIXs_lE&feature=related" placeholder (do not delete) utube.png

Feb 14, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

How do i change ink?


If iam not wrong you want to replace the Ink Cartridge. Please follow the below mentioned instruction.

Replacing the print cartridges
  1. Turn on the HP Officejet, and lift open the print-carriage access door. The print carriage will move into the access area. Figure 1: Opening the print-carriage access doorc00034766.jpg
  2. After the carriage stops moving, push down on the top of the print cartridge to release it, and then pull it toward you out of the slot. Figure 2: Removing the print cartridgec00034767.jpg NOTE: It is normal to see ink buildup in the print cartridge slots.
  3. Remove the new print cartridge from the packaging and gently remove the plastic tape by using the pink pull tab. CAUTION: Do not touch the copper contacts or ink nozzles. Install the cartridge immediately upon removing the tape to prevent ink from drying in the nozzles. Figure 3: Removing the plastic tapec00034768.jpg
  4. Push the new print cartridge into the appropriate slot at a slight angle, until it clicks into place. CAUTION: Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. Figure 4: Inserting the print cartridgec00034769.jpg
  5. Close the print-carriage access door.
Back to top Aligning the print cartridges The HP Officejet will prompt you to align the print cartridges every time you install a new print cartridge to assure high-quality output.
  1. When the message displays, press OK . The HP Officejet will print an alignment page.
  2. Place the alignment page face down on the left front corner of the glass with the top of the page facing the left side.
  3. Press OK . The HP Officejet will align the print cartridges and display Alignment Complete .
Regards,
Shrey

Oct 08, 2009 | HP Officejet 5510 All-In-One Thermal...

1 Answer

Trying to align heads, 5610 HP all-in-one


Hello,
This seems to be an issue with the alignment of the printer.
Remove both the cartridges from the printer and clean the cartridge contacts with a soft lightly moist cloth and then re-insert the cartridges. Unplug the USB cable of the all-in-one and then let the all-in-one perform the alignment process and once it prints the alignment page. Once the alignment page prints out, place the alignment page (With the printed side on the scanner glass) and then press the Scan button. the alignment process should complete successfully.

For more information, refer the below hp document.


http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00442099&cc=us&lc=en&dlc=en&product=441125


Jan 07, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

My printer wont print it keeps saying press enter to alein cartridge


I just noticed in the link to your forum item that additional text appears that does not appear in the item itself. It looks like you are getting a message telling you to press Enter to align your print carriage. This is a common step after you replace an ink cartridge. According to HP.com, here's what you are supposed to do:

"A message will appear in the front panel display requesting that the ink cartridges be aligned. Press Enter to start the cartridge alignment. Two pages will print. Following the instructions printed on the second page, place the first page on the scanner glass in the lower-right corner and then press Enter to finish aligning the cartridges. Remove the page from the scanner glass when complete".

The link to those instructions is as follows:

Replace the Print Cartridge

Just follow the instructions I posted above in italics and you should be good to go. Good luck.

Oct 12, 2008 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Scanning and copying all in one 5610


pls. check ur scanner cartridge move or not if it is move then

set the default settings of printer menu

if the problem resolve pls. remark me

Jan 30, 2008 | HP Officejet 5610 All-In-One InkJet...

1 Answer

OfficeJet K60 All In One Problem:Aligning Cartridges


In the process of alignment there are two phases:

1. When the message comes to align the ink ..press ok and the page is printed out.

2. Once the page is printed then place the page on the scanner glass and tehn scan the same.

Follow these two steps in the same order and it will never give Align Ink Cart message again.

Oct 24, 2007 | HP OfficeJet k60 All-In-One InkJet Printer

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...