Question about Dynex DX-WC100 Webcam

1 Answer

USB ports/Driver downloads with dynex 1.3 webcam

We have a dynex 1.3mp webcam. Everytime we plug it into our computer it shows up first as an audio drive, and then the dynex 1.3mp webcam. It then immediately shuts off and is no longer found under "my computer." The computer cannot seem to download the drivers, it just says that there was an error. We have tried both USB ports and niether seems to work. We have an operating system of Windows XP, Serivce Pack 2.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 818 Answers

Download the driver from this page where also you find some documentation that can help you

Sergio
http://www.dynexproducts.com/pc-692-10-dynex-13mp-web-cam.aspx

Posted on Jul 02, 2009

  • nontechminde Nov 17, 2010

    I have downloaded the drivers, but my computer will still not recognize the webcam. It worked perfectly for about 8 months, I stopped using it for about a month, and when I plugged it into the USB port, it was as if the software had been stripped. I can not locate the 'software' disk which came with the camera and am trying to find that software to reload to my computer. They do not have it at the site you listed above, which is where I reloaded the drivers from. Any suggestions?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dynex headset does not shut off sound from desktop when plugged in usb port


Plug the USB connector into an available USB port.
• Check your computer's volume level.
• Check if your computer's volume is muted.
• Check your operating system's audio input and output settings.
• Check the headset's volume and mute settings.
• Restart computer.

Otherwise, I would recommend pursuing replacement options

Sep 13, 2012 | Dynex Mono USB Headset with...

1 Answer

How do I configure my Dynex USB microphone?


try uninstalling it and then re-installing it:

Plug the USB connector into an available external USB port on
your computer or laptop. On most computers, drivers install
automatically and your microphone will be ready to use.

Note: On Windows, if you are prompted with the Add New Hardware Wizard, follow the steps to download and install the driver.

Jul 07, 2012 | Dynex USB Microphone

1 Answer

Headphones usb not working


try uninstalling and then re-installing it.

Plug the USB connector into an available external
USB port on your computer or laptop. On most
computers, drivers install automatically and your
headset will be ready to use.
Note: On windows, if you are prompted with the Add New Hardware Wizard, follow the steps to download and install the driver.


If you can not hear audio on your headset, adjust some or all of the following settings:
• Plug the USB connector into an available USB port.
• Check your computer's volume level.
• Check if your computer's volume is muted.
• Check your operating system's audio input and output settings.
• Check the headset's volume and mute settings.
• Restart computer.

Jan 22, 2012 | Dynex Mono USB Headset with...

1 Answer

Has a USB connector that when I connect I can not use my Google Talk - what am I doing incorrectly? Best, Yvonne


try uninstalling and re-installing the headset. Plug the USB connector into an available external
USB port on your computer or laptop. On most
computers, drivers install automatically and your
headset will be ready to use.
Note: On windows, if you are prompted with the Add New Hardware Wizard, follow the steps to download and install the driver.


For any audio issues:
Plug the USB connector into an available USB port.
• Check your computer's volume level.
• Check if your computer's volume is muted.
• Check your operating system's audio input and output settings.
• Check the headset's volume and mute settings.
• Restart computer.

Sep 24, 2011 | Dynex DX-840 Headset

1 Answer

Every time i plug in the dynex dx-web1c hardware (camera) in to usb port, it freezes my comp. ctrl+alt+del wont even work when comp is froze.


After you get your Webcam drivers properly installed, DO NOT unplug it from the USB port as it will cause the drivers to become corrupt.

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function
properly.


A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and
Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to
see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger

(http://www.soft32.com/download_30.html )

set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the
computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call
setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on
top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.”
And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or
friends you are connected to.

D. AIM (AOL) Messenger

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and
video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window.
If you are currently participating in an AOL Live Video IM session, a message will display:
You must disconnect the current AOL Live Video IM conversation before running setup. Would you
like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers
and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to
first check your audio and video settings? Click the Yes button. The Audio and Video Tuning
Wizard will appear to help you verify that your camera, speakers and microphone are working
properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may
appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.

After you get your camera installed properly, DO NOT unplug it from the USB port as it will
cause the drivers to be corrupt and render the camera unusable till reinstalled it properly.
Hope this helps. Bud

Jan 18, 2010 | Dynex DX-WC100 Webcam

1 Answer

XND-1 will not work with mxl upload/download on windows usb port


Try the Prolific Drivers at:
http://prolific.com.tw/eng/download.asp

I have a Dynex Dx-UBDB9 Serial-USB cable that did not work in
Windows7 and downloaded this driver:

PL2303_Prolific_DriverInstaller_10311.z ip

It even worked on my 64bit system.
good luck

Also,
Remember to unplug anything plugged into your USB ports, install the software, reboot the computer, plug in
the USB-Serial Cable (but disconnect it from what it is attached too, ie, a GPS unit), and windows7 should recognize it.

then plug in your GPS, modem, or what ever is plugged into the serial-end of the cable and you should be good to go.

If all else fails, let Windows7 try find the driver for you, Windows7 is much improved.
modify_inline.gif


Nov 26, 2009 | Computers & Internet

1 Answer

I have a dynex web cam, I can't get it to run


you might disable the usb port? or just go to the control panel and go to add hardware then just click detect hardware

Jun 30, 2009 | Dynex DX-WC100 Webcam

3 Answers

How to install the webcam?


go to your internet browser. type the model of webcam to googles. like this lifecam VX-3000 driver download. or go to the website of webcam stated in the box.

May 28, 2009 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Vista software download


http://www.p4c.philips.com/files/s/spc700nc_37/spc700nc_37_dwv_eng.exe
Sergio
Todo: Check USB port
Howto:
061027085005_16154.png Refit the USB cable into the port.
061027085005_16154.png Plug the webcam into another USB port.
061027085005_16154.png Use an external powered USB-Hub. Some USB ports on computers do not have enough power to feed USB devices (this mostly occurs with laptops).
061027085005_16154.png Try to install the webcam on another computer.
Todo: Update your computer
HowTo: Update the USB driver in Windows

USB driver update in
WindowsXP
061027085005_16154.png Click Start -> Control Panel -> System
061027085005_16154.png Click the tab Hardware and then click on Device manager
061027085005_16154.png Click at the bottom of the tree on the + sign before Universal Serial Bus controllers
061027085005_16154.png Select the first entry, right mouse click and click on Update driver...
060905164742_15580.png
061027085005_16154.png Follow the steps to update the USB driver
Windows2000
061027085005_16154.png Click Start -> Settings -> Control Panel -> System
061027085005_16154.png Click the tab Hardware and then click on Device manager
061027085005_16154.png At the bottom of the tree click on the + sign before Universal Serial Bus controllers
061027085005_16154.png Click on General USB Hub, right mouse click and click on Properties
060905165437_15581.png
061027085005_16154.png Click on the tab Driver and click on the button Update Driver.
061027085005_16154.png Follow the steps to update the USB driver
Todo: (re)install the latest driver
HowTo:
061027085005_16154.png Deinstall any webcam driver (Philips drivers or webcam drivers from other brands you might have installed in the past)
061027085005_16154.png Cleanup the computer with for instance CCleaner (select Issues (1) and click Scan for Issues(2). Fix issues if necessary)
070410164716_18420.png

061027085005_16154.png Download and install the latest driver.

Apr 12, 2008 | Philips SPC700NC Webcam

Not finding what you are looking for?
Dynex DX-WC100 Webcam Logo

Related Topics:

5,201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

micky dee

Level 3 Expert

2727 Answers

Are you a Dynex Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...