When i slide to take a pic it says that camara

I have a Casio Exilim EX-V7 and I had the same Camera Stabilizer is not available problem, the firmware on my camera was 1.01 (hold down the menu key while sliding the cover open, keep holding until your firmware version displayed) From Casio.com, I downloaded the new firmware 1.03 (you need to register your serial number to do this (put in your serial number ONLY NUMBERS no letters from the bottom of the camera). Run the file you download to extract the bin file needed for the firmware. Connect the camera to your computer. When the folder opens put bin file into that location. MAKE SURE THE CAMERA BATTERY IS CHARGED. Hold down the shutter button (on top) at the same time press and hold the menu button then whil holding those two open the lens cover to power on the camera. It will prompt you on the screen to do the rest. It upgrades very quickly.
Mine still shows the Stabilizer error at startup however, it doesn't turn off and i can take pictures. Have fun and good luck.
Steve