Fatps2 stuck at option menu 50/60 hz and continue without saving?
I just fixed my ps2 fat version from disk read errors. I just get stuck at one game. Its ''Black'' the game it is a dvd game for ps2. I get stuck at the moment it asks for input eighter at 50hz / 60hz selection menu or continue without autosave menu.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The first is that "Disc Read Errors Diagnosis mode could be the solution.
Load your PS2 without a disc inside and wait until you get to the main menu.
Press Triangle and highlight "Console", then press Triangle again and set "Diagnosis" to ON. What does this setting do? Basically, it focuses the laser on the disc so that it has an easier time reading discs.
In addition, you must turn this setting on EVERY time you load your PS2, as the PS2's system settings are never saved when you turn off your console
Disc read errors are mainly due to worn out lens or dirty PS2
lens.Clean your PS2 lens to get rid of this problem if your lens is
dirty.Watch this video it will help you to know how to clean your PS2
lens.Watch it carefully.
Remember to keep your PS2 in Dust free environment if you don't want your PS2 lens to get dirty. If your PS2 can not play certain games like Rock band try this tip:
Turn on your PS2 without inserting any disc.
Menu screen will appear like:
Press the (triangle) Button to enter Version Information Menu that looks like
Highlight the Play Station Driver as above and again press (triangle).
New screen will appear like
Highlight the Disc Speed as above and press button,to enter Disc Speed Menu
And set it from Standard to "Fast".
After you set Disc Speed to Fast, Press and Hold Reset Button to turn off your console.
Then again Press and Hold Reset Button till the Blue Light turns on.
Well first off, make sure the disk if in PS1 OR PS2 format. That is what the PS2 Is requesting when it says "Please insert Playstation or Playstation 2 format disk. The Slim PS2 has various problems reading disk.(Don't Know why? I own it and Know it does). The Fat version(1st version) is a much better system, in my opionion. Try blowing air to clean the disk reader. Or changing the disk reader portion out, At a small price.
Disc Read Error generally means that the game disk cannot be read by your console.
Reasons for Disc Read Error 1. Disk surface scratched or smudged. 2. Disk surface dirty. 3. Lens surface dirty.
Here is what you can try doing.
1. Check the game disc for any scratches or smudges on the surface of the game disc, try to clean them off by using a non-abrasive cotton cloth.
2. If the PS2 console is lying down, please set the console to on its side or if it's on its side set it to flat position, restart the console and then try game again. Always ensure the PlayStation 2 is in a cool, well ventilated place.
3. Remove and reinsert the Memory card of your PS2, restart the console then try running the game again. Other troubleshooting that you can try.
Change the Disc speed of the PS2 DVD and then try again.
Start the PS2 with no disc in a drive. Press the "triangle" button on the controller. Use the up and down buttons on the controller to select "Playstation Driver” and press the "triangle" button on the controller. Select Disc speed. If it is set to "Fast," select "Standard"; if it is set to "Standard", select "Fast" and press the "X" button on the controller. Press the "O" button on the controller. Insert the game disc and restart the PS2. Try running the game again.
Turn the Diagnosis On for PlayStation2 to auto detect the best settings.
From the Browser and System Configuration menu. Press the triangle button to select Version. Highlight the Console from the list and press the triangle button - this accesses the next menu option. The Diagnosis will be highlighted. Press the X button to access the options available. Highlight "ON" and press the X button to affect the change. Restart the console and try the game again.
If the above steps does do not solve the error then you would probably have to replace the disc.
Note: If you are using the Slim version of PS2 make sure that the console is properly ventilated and that it should always be in the standing position, as the slim version of PS2 no fan or any other cooling unit unlike the normal PS2.
hello pauldonp...if this is an early version of the slimline they had a problem with over voltage which inturn took out the laser.your only option may be to replace the laser . sony did bring out a mod for this..i preferr the real old version of the ps2 as they had all separate boards and if one went faulty you didnot have to replace the lot ,also the lasers were a lot cheaper than the later models .in the slim lines the lasers are not all that expensive .they do take a bit of setting up as you have to know the ohms setting on the laser for each model..hope this helps
Check your disk for scratches fingerprints ect,, if thats all good step two try useing a lens cleaner
****(( tip and trick for scratched disks ))**** a crayon rubbed on the disk then wiped off with a lint free cloth no t-shirts dish towels that will just add more scratches remember start at the center wipeing out to the edge.
To fix this problem, you will need to open your PS2 and re-adjust its lens. To open your PS2, first turn it upside down. Remove the 4 rubber feet and 6 square tabs (circled in the picture) by sliding a flat screwdriver (or something similar) underneath them.