The "E" won't go, even though I have tried to reset and load fresh paper, etc
Download the most current driver from HP. Disconnect the printer from the computer and uninstall the drivers you have installed, you might have to restart the computer. Install the downloaded driver, it will tell you when to plug in your printer and turn it on. If it still does not show the printer, you may have a USB problem. Go to Device Manager and uninstall the USB Controllers and reboot the computer
SOURCE: i need installer of hp deskjet f300 all in one
You can find the drivers at the following HP website.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=1129389
133 views
Usually answered in minutes!
×