Question about RIM BlackBerry? Curve 8330 Cellular Phone

1 Answer

Left corner button does not work

I have similar problem my mentropcs phone was washed in the washer. After days it now comes on and i can shut it off, however when on the upper left button will not work and if i press too hard it shuts off the phone. Now i cant delete text or receive incoming calls.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 55 Answers

You have damaged your keypad my friend you can do one of two things send it in for repair which might be pricey or repair it yourself I usually go to http://cnn.cn for my cellphone parts they are great for that.

Kyle

Posted on Jul 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when your iphone 4 wont turn on but the LCD is fine?Just look at the details below


Hi there,
where did the phone land - (eg top left corner - front)?
Is there damage to the chassis of the phone?
If there's a crack in the screen and a little moisture got in there would be problems, also if the contacts to the display are damaged this could do something similar to what you are describing.
I have seen iPhones and iPads still working with very broken screens, but I guess the damage was to the outer screen cover only.

May 26, 2014 | Apple Iphone 4s I Phone 4 S Factory...

1 Answer

When i turn it on it bleeps and f 37 comes on


u have a fault the operation of the washer.

The machine has a defrost function, pressing the temperature button twice will start this and show a snowflake in the top right hand corner Press the temperature button twice, ( A snowflake will appear in the top left corner) this acts as a defrost button. F37 will probably occur more often if your machine is stored in a outhouse. or try thawing out the water pipe.

Jan 12, 2010 | Bosch Logixx WFR 3267 Front Load Washer

1 Answer

Kenmore Elite won't start


The control panel (touch panel) is faulty - and must be replaced.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 27, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite top loader electric washer


you have poor contact with the left lid hinge and the lid switch.1st open the lid and check the 2 phillips head screws on the left side of the hinge.if they are loose tighten them and try mach.if the screws are tight,the lid switch might need to be replaced or adjusted.there will be 1 screw in each corner of the back of the console facing down.remove and flip console up,if there are no screws,take a putty knife and slide under front left and right corner of console and flip console up.the lid switch will be on left.if it is not broken out of socket,adjust hinge bar underneath switch by removing switch and bending silver bar up SLIGHTLY

Sep 27, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

WASHER FILLS BUT THEN WON'T START. WILL LIFT THE LIFT AND CLOSE SEVERAL TIMES AND THEN WILL START. NOW DOESN'T START AT ALL. IS THIS THE SWITCH ON THE DOOR, SHOWING IT ISN'T CLOSED SO IT WON'T START?


must be a whirpool or kenmore shut lid try pressing down on left rear corner be sure lid hinge screws are tight then raise lid on left corner under top out of sight you will feel small lever push toward back of washer slightly and then try again also if lid center has popped down push up slightly in center till lid pops back up sen it happen once where washer would not spin

Jun 17, 2008 | Washing Machines

1 Answer

Kenmore Washing machine


ck lid switch also ckd hinge screws that looks like newer moder with switch under left side of console try pressing left rear corner of lid or listen for clock when lid is shut slowly

Jun 03, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer will not start. Water will come in. Will not spin or agitate.


new washer? whirpool is manufacturer lift lid do you hear clicking sound left corner of lid if not ck screws in hinge that corner possible lid switch is not being struck properly when lid is shut also may need to adj hinge by pushing contact lever back a little ..older unit? possible same thing different location also ck wiring to motor

May 28, 2008 | Amana Washing Machines

4 Answers

Kenmore Front Load Washer 417.44152400 lights up, no activity


Find the button on your panel with a 'key' symbol. Press & hold this down till the lock light goes off. Or

Hold down the 'options' & 'select' buttons together till the lock light goes off. Or
Press and hold down "end of cycle"
Pl. rate & tell me what did it - it is important.

May 23, 2008 | Kenmore 44102 Front Load Washer

Not finding what you are looking for?
RIM BlackBerry? Curve 8330 Cellular Phone Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top RIM Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Jason

Level 2 Expert

211 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a RIM Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...