Question about Uniden DCT648-3 Cordless Phone

1 Answer

Uniden DCT648-3 "welcome Please Wait"

Every time I try to use any handset the screen displays "Welcome Please Wait" message. Nothing happens, no dial tone. Base unit "in use" light comes on. Why? How can I get the handsets to work?

Thanks.

Posted by on

  • 7 more comments 
  • Anonymous Feb 09, 2008

    DCT646-3 - Same Problem, 1 of 3 handsets just says "Welcome! Please Wait..." - New battery (which works fine in other handset)

  • Furiae Feb 16, 2008

    I have the exact same problem. All I can get is "Welcome! Please wait..." The battery is not the problem because I can take the battery from this phone and put it in another phone and the other phone works fine.

  • dee rrr Dec 22, 2008

    I have the same problem with all the three handsets. When I see the "Welcome please wait" message, the call has automatically transferred to the base set, and I can put that on speaker and talk.



    The recommended solution is to change the battery... I don't understand why I need to do that, as all handsets are continuously charged, so all the three handsets' batteries should be charged.

  • Anonymous Dec 28, 2008

    same problem here. we just got the phone for christas brand new, have been charging it for over a day and same message...welcom please wait... stays on screen and nothing works. Help

  • Anonymous Jan 08, 2009

    same problem here.

  • scotdawn Jan 17, 2009

    Agreed, it is not the battery.

  • Anonymous Mar 22, 2014

    Message Light comes on automatically when we use the phone, without any messages coming through

  • Anonymous Mar 23, 2014

    when connected to the base charger with a new battery,the screen flashes on and off,welcome! please wait...

  • Anonymous Mar 30, 2014

    charges but no phone access

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You need to replace the battery

Posted on Dec 25, 2007

  • hasanur Dec 25, 2007

    You need to change th eBatery

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Uniden XDECT R055+2 . Hi, I was in the middle of listening to messages when the base unit started flashing Welcome please wait, and all 3 handsets have searching on them. The link light is also flashing....


this phone is the cheapest chines brand phone,with lot of problems,all you need to do is to go to service,because phone have bad solder,and all contacts must solder again,it is only problem,nothing else.

Jan 16, 2014 | Uniden Lands Phones

1 Answer

One handset gives the message, blinking, Welcome!


I replaced the battery. It solved the problem.

Dec 20, 2009 | Uniden DCT646-3 Cordless Phone

2 Answers

Phone says ''Welcome ... please wait'' when you try to use it


Hi,

I tried to copy and paste the solution for this issue, but Fixya only allows so many charecters and I guess the answer is too long.
Go to http://www.uniden.com/index/manuals_results.cfm?cat=1

and select the owner's manual for your model phone. Follow the procedures for deregistering the handsets and then resetting the base. then re-register the handsets and you should be good to go. It is all pretty easy, just a little to wordy for this forum I guess.

Apr 04, 2009 | Uniden Cordless Phone

2 Answers

Uniden DSS7855+1, flashing ''welcome! please wait...'', wont work


This is not a direct solution to your problem, but a workaround for a similar situation. I have two headsets and two charging stations. One of the headsets was stuck with the message ''Welcome! please wait''. When I put the phone on the charging station it usually sits on nothing would happen, but when I put it on the other station the phone came back to life. The non-working charging station will still charge the phone so it is worth keeping.

Mar 04, 2009 | Uniden Lands Phones

1 Answer

Base unit displaying E4 after we experienced a power black out


e4 error code that means it ihas defective base unit. it happened due to a spike in the power lines that may cause this error

Feb 09, 2009 | Uniden 5.8GHz Cordless Phone

1 Answer

Uniden TRU8885-2 Restarts every time an incoming phone call, start showing the Welcome message ....


YOUR batteries are bad and not giving full current to phone.Clean charging contact and see battery gets full charge. IFthe battery indicator will show full charge due to voltage but once if you remove battery and put it again indicator will be minimum. then replace batttery.

Oct 07, 2008 | Uniden TRU8885-2 Cordless Phone

6 Answers

UNIDEN DWX207 SERIES ITS WATERPROOF


Same thing was happening to my phone...Welcome! Please wait... After at least 40 hours of charging I was getting a little fed up. I picked up the handset, took a ball point pen and pushed the "activation" area on the bottom the phone...heard a click...now it is working. I don't think the tiny pin that comes with the phone activates the phone properly.

Jul 24, 2008 | Uniden DECT 6.0 Cordless Telephone...

8 Answers

Uniden PowerMax 5.8


To make the message light go away when there are no messages - remove the handset from the base and press and hold the "find handset" key for 5 seconds. Resets it!

Hooray!

Aug 04, 2007 | Uniden TRU8885 Digital Answering Machine

Not finding what you are looking for?
Uniden DCT648-3 Cordless Phone Logo

5,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8064 Answers

Cindy Wells

Level 3 Expert

5380 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...