Question about Kodak EasyShare C613 Digital Camera

1 Answer

The lens is stuck open and won't turn on - Kodak EasyShare C613 Digital Camera

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 248 Answers

This seems to happen when something (water, sand, dust) gets trapped in the lens mechanism. Has the camera been somewhere filthy before?

The recommended methods include banging on the bottom of the camera, rapping it on a table, and pressing hard on the lens. If the lens moves when you turn the camera on, try keeping your hand on it so that it's forced back into the camera body. A can of compressed air squirted around the lens is also a possible fix... but be super careful with that stuff, a good hard blow of breath might be safer.

I'm not recommending that you do crazy stuff to your camera, but if you're careful you may be able to get it working again without having to get it serviced.

Posted on Jul 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lens stuck


Please see this link for troubleshooting steps for a stuck lens.

And here's a video summary of the steps.

Apr 28, 2013 | Samsung S860 Digital Camera

1 Answer

Shutters on the lens won't fully open


Stuck automatic lens covers are fairly. But usually it's very easy to fix, without even opening the camera. See this link for troubleshooting steps for this problem.

Dec 14, 2012 | Kodak EasyShare C633 Digital Camera

1 Answer

Sony dsc-w190 won't turn on


The system control board has shut the camera down to prevent damage, the lens housing will need to be replaced because you have two problems, one the lens is jammed and second the shutter is open, the cost to repair will be equal if not more than a new one.

Mar 31, 2012 | Sony Cyber-shot DSC-W190 Digital Camera

1 Answer

WHEN I OPEN MY CAMERA THERE IS A WORD E18.


Hi,

Canon E18 error shows when the lens gets stuck while trying to extend.
  • This error indicate that focusing ring got stuck or jammed due sand, dust, may be due to external shock caused by dropping the device. try compressed air. With a fine tip blow off gun around lens barrel. It should remove all dust and sand. Turn the camera on this will solve the problem.
  • You can gently bump the camera to try to free the focusing ring.
  • You can try to turn camera ON at the table (facing it to the ceiling), don't put camera down face to the floor when opening.
If motor is running but lens won't retract sometimes lens would slip off with the gear or break off a tooth in the gear when it gets dropped. Try to gently move the lens barrel around with the finger and see if it is moving, but if tooth or gear is broken lens will move once or twice then it will stuck again.

Else your camera need to be disassembled to get at the focusing ring at Service Center.

Thanks and have a nice day

Jul 04, 2011 | Canon PowerShot A470 Digital Camera

1 Answer

LENS OPENING BUT NOT SHUTTING


Hi,

Its seems lens got stuck in the barrel due to external shock caused, Try out following steps-

  • If motor is running but lens won't retract sometimes lens would slip off with the gear or break off a tooth in the gear when it gets dropped. Try to gently move the lens barrel around with the finger and see if it is moving, but if tooth or gear is broken lens will move once's or twice then it will stuck again.
  • You can gently bump the camera to try to free the focusing ring.
  • You can try to turn camera ON at the table (facing it to the ceiling), don't put camera down face to the floor when opening.


Else contact Olympus, your camera need to be disassembled to get at the focusing ring at Service Center .

I hope this will solve your problem

Thanks..!!

Jul 04, 2011 | Olympus Mju 725 SW Digital Camera

1 Answer

Camera lens cover won't open when you turn the camera on. Says "power off then on" but still stuck


This kind of problem occurs if camera dropped on floor that broke lens mechanism OR lens mechanism got dust particles that make it stuck.
Usually lens mechanism needs to be replaced to solve the issue, however, user level try to solve the problem is to tap camera on your palm a few time gently that may release stuck lens mechanism and it start working again, if that does not help then lens assembly will be replaced.
Thanks.

Jun 10, 2011 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Lens is stuckpartly open power button does nothing-won,t turn off


mine has done this and I have grabbing the lens and pulling it out at the same time as I turn it on. It is a pain but it now works

Jun 24, 2008 | Samsung Digimax L730 Digital Camera

Not finding what you are looking for?
Kodak EasyShare C613 Digital Camera Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...