Question about Logitech Wireless Access Duo Optical Desktop Keyboard/Mouse KBWIREOPT

9 Answers

Logitech s510 keyboard

Key board does not respond , but mouse works exellent.
when I press the red switch, the green light blinks and goes out.

Please help! I am using a wired key board to type this.

Posted by on

  • 11 more comments 
  • Anonymous Feb 09, 2008

    ook well i tried this!?

    but it still didnt work!?

    my computer is very well protected so i know i dont have a virus. & i checkd the BIOS screen and it worked!

    but the keyboard still dont work!

  • BETTYE42 Mar 04, 2008

    WILL NOT COME ON OR AM I ON THE WRONG CHANNEL

    WHAT IS IT

  • Anonymous Mar 17, 2008

    my wireless keyboard dosn't work

  • Anonymous Mar 17, 2008

    I have the same problem, mouse and remote is connecting fine, but the keyboard just don't want to connect.... tried it on two different computers, changed the batteries... nothing seems to work... This should not be a driver issue, the keyboard has worked fine without drivers before...

    Regards, Tean

  • Anonymous Apr 01, 2008

    i had the same problem, i re-installed the software i pulled the usb wireless reciever out and put it in the same port, but what made it work was putting it in a different port. when it was in the other port, every one of the top silver buttons worked and the scroll button worked, but the keys i actually needed didnt work

  • lwinting May 01, 2008

    mouse works great. keyboard has quit. No lights, changed batteries. still no response

  • embro Jun 05, 2008

    my keyboard letters and numbers will not work. the three lights are flashing. how can i solve this problem?

    checked all conections tturned keyboard upside down. shut down,start up

  • hk4s99 Jun 24, 2008

    my mouse works fine, but they keyboard only somewhat connects. i can hot f1-f4 to get the programs up and the zoom and music buttons work. but the buttons i really need do not work, all the keys with letters and numbers. when i hit the [F] mode key the light on the reviser turns on and off, but when i try the same for the caps and num lock keys nothing happens. i checked the drivers and under the mouse it shows the usb mouse and ps/2. when i checked the keyborard the on drivers it only shows the ps/2.

  • Anonymous Jul 20, 2008

    my letters and numbers suddenly stopped working. My other keys work fine (so connection seems to be ok). Not sure what to do...reinstalled setpoint program and updates - still no luck. pulled out of usb and put back - still no luck. wonder if there is a keystroke combination that just shuts down the letters/numbers...

  • graffitiguy Jul 21, 2008

    My keyboard isn't responding at all either. When I go to check the keyboard setting on the control panel it doesn't detect any hardware at all. yet when I move my mouse around and type the cursor freezes until I stop pressing keys. I think it may be getting the signal from the wireless mouse receiver but I still can't find out what's wrong with the keyboard.

  • emailjestzly Jul 30, 2008

    Worked few days and suddenly i was unable to loginto wondows cause the kayboard didnt work xD i connected my old one. Theres few really strange things: I got 4 usb and after changing the plug the s510 started workin properly, but after a restart it didnt work again and changing to the prewious usb plug didnt help. Another weird thing is that even now as i have both (my old and s510) connected the s510 stol/play/next/prev/home/function etc buttons work - but only these ones. Please help. Thanx. Alan.

  • radeonex Oct 11, 2008

    My wireless keyboard can't connect after I changed the receiver's usb port.

  • DUCKY1929 Dec 02, 2008

    I HAVE A LOGITECH WIRELESS KEYBOARD THAT SUDDENLY QUIT WORKING. THE CORDLESS MOUSE WORKS FINE. ANY HELP?

×

9 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this problem for a very long time as well. Turns out this is an encryption issue. It's off-balance. You need to reset the encryption, and here's how:

On the LEFT side of your wireless keyboard press and hold Ctrl+Alt, and press F12, then release all three buttons. Now push the Connect button on your Wireless Receiver, then the connect button on your wireless keyboard. Now press Esc. Try it. See if it works. It did for me.

Posted on Oct 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Thanks. The CTRL +ALT+F12 and Esc did the trick. This confounded me for 6 mo ago and I gave up using my crappy old keyboard. I bought a new S510 thinking mine was broken but after that didn't work, I found this website. Thank you, thank you, thank you.

Posted on May 18, 2009

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ehi mage102, you just saved me hours of pain :-)
Thank you so much!

Posted on Jul 31, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Here please check if its USB KEyboard or PS/2 Keyboard. If its USB keyboard try connecting the keyboard to another working USB port.

Otherwise; Try connecting the Keyboard to another comp and check if it works. If another comp is not available, then turn on the computer and enter the BIOS screen (hit Del, F2 key to enter BIOS key). If keyboard works it will enter BIOS screen.

Note: If keyboard failed then on boot screen there will be a Keyboard error and comp will not boot.

If computer boots in BIOS screen then its not Keyboard issue. THe issue could be related to virus. Try working on On-Screen Keyboard. To enable ON-Screen keyboard, using mouse click on Start button and click on RUN. In Run box type OSK. As you cannot type OSK, using mouse, copy the characters OSK one by one from any word file and paste in the Run Box.

If its virus then scan for virus and this issue can be fixed if remote access is taken.

Posted on Nov 22, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thank you Mage1028. That is brilliant!! The Ctrl+Alt+F12+Connect Wireless Receiver+Connect Button on Wireless Keyboard really did the trick!! Thank you.

Posted on Dec 01, 2013

  • 1 more comment 
  • PlugandSlug Dec 01, 2013

    Thank you Mage1028. That is brilliant!! The Ctrl+Alt+F12+Connect Wireless Receiver+Connect Wireless Keyboard did the trick!! I was losing hope after replacing the wireless keyboard with new batteries and still nothing worked so I made up my mind to just replace it with another keyboard and as luck would have it, try to Google it and check to see if I can find one last answer or solution to this problem. Sure enough I stumbled on this website and I read Mage1028 solution and Voila!! Wireless keyboard is working like a charm again. Thank you!!!

  • PlugandSlug Dec 01, 2013

    This actually the correct steps:

  • PlugandSlug Dec 01, 2013

    1. Ctrl + Alt + F12 then Release all

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, mouse works all the time but not the keyboard, I HAVE don't all of your request, I HAVE updated driver I have done everything! When I log in, lights (F) and (1) is on, and when I press enter (1) goes out. And every time I press a button on the keyboard is says BEEP!!!!!!! It pisses me of!

Posted on Jul 02, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Ctrl - Alt + F12 also worked for me

Posted on Jun 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Ctrl + ALT + F12 worked for me.

Thanks,

Posted on Apr 15, 2009

I'll tell you what fixed it for me... setpoint... setpoint was messing it all up for me, the keyboard wasnt responsive nor was my g5 mouse, but i uninstalled setpoint and everything worked fine

Posted on Oct 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed battery correctly but the on/off green light keeps blinki


you have to hit the button on the wireless base adapter as well as the one on the mouse its self


good luck and pls rate this post

Mar 23, 2010 | Logitech Wireless Access Duo Optical...

1 Answer

Optical light on Mouse not working


Hello,

maybe the battery?
follow the steps below to troubleshoot the mouse
Wireless mouse does not respond (generic instructions)

Try to Resynchronize your device with the receiver(connector)
Follow these steps.:
Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put other wireless keyboards and mouse at least 6 feet away.
1. Press the button on the receiver, and then verify that the light on the receiver starts to blink.
2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step.
2. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
3. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 3 again.
For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed.
or
Try different port and restart your computer.
or
Reinsert the batteries or install fresh batteries
If you have the possibility check whether the problem is because of your computer or the device, try the mouse or the keyboard on a different computer.

Sep 06, 2009 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Not working


dear,


The small notch in usb device socket under the mouse could be malfunctioning. If you press this notch you will find the mouse red light blink. If you further try pressing this notch at some point the mouse red light comes on constantly. Thats it, hold it there and try to connect first by pressing the usb device connect switch and then the mouse connect switch. The moment the connection is made the usb device stops blinking and the red light on the mouse starts blinking. Wow, it works now. Some one might just open the mouse and fix this microswtich for a permanent solution.

regards,

dont forget to rate it

Aug 19, 2008 | Microsoft Wireless Notebook Optical Mouse...

2 Answers

My logitech mouse has a blinking orange light one it


had a similar problem. i took the new batteries out again and WAITED about 20 seconds before putting them back in. the red light stopped blinking.

Jul 21, 2008 | Logitech MX 600 097855036162

9 Answers

MS wireless notebook mouse 3000 not working?


A friend of mine brought me this problem with exactly the same problem. here is what I found. The small notch in usb device socket under the mouse was malfunctioning. If you press this notch you will find the mouse red light blink. If you further try pressing this notch at some point the mouse red light comes on constantly. Thats it, hold it there and try to connect first by pressing the usb device connect switch and then the mouse connect switch. The moment the connection is made the usb device stops blinking and the red light on the mouse starts blinking. Wow, it works now. Some one might just open the mouse and fix this microswtich for a permanent solution.

Jul 08, 2008 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Mouse optico doesnt work


dear,

The small notch in usb device socket under the mouse was malfunctioning. If you press this notch you will find the mouse red light blink. If you further try pressing this notch at some point the mouse red light comes on constantly. Thats it, hold it there and try to connect first by pressing the usb device connect switch and then the mouse connect switch. The moment the connection is made the usb device stops blinking and the red light on the mouse starts blinking. Wow, it works now. Some one might just open the mouse and fix this microswtich for a permanent solution.

regards,

hope it will fix your problem

Jun 27, 2008 | Microsoft Wireless Notebook Optical Mouse...

1 Answer

Keyboard stopped responding


Please re plug your cable from your usb point provided in pc.Which windows are u using if xp or vista it will re-detect.

Dec 22, 2007 | Logitech Cordless Desktop MX 967300-0120...

1 Answer

Red light


If you're talking about the red light on the bottom of the mouse, it is needed for the mouse to track its movement. When the mouse is not being used, this red light blinks only once per second or so to save power, but once it sees movement, it will come back on.

Aug 17, 2007 | Logitech RX600 Mouse

Not finding what you are looking for?
Logitech Wireless Access Duo Optical Desktop Keyboard/Mouse KBWIREOPT Logo

5,023 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...