I have to send pcx file (logo our company) to the EasyCoder PD 41 printer. I try to connect printer to pc via com (OS WinXp Pro) but I have any answer from printer side.It`s look like printer do not become any signal form pc. I hope, that it is no very seriuos problem but I can not fixed this. Best regards, Ewa
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
make sure you have the current drivers for this printer are loaded. and select the wired set up configuration type. go to control panel select printers and see if the printer is visable to your pc. if not start over and reconfigure a new printer. and
follow the prompts. and may i also suggest going to there web site and check for the latest and the greatest on your model.
I can help you with this. Please let me know what method you are using to send images (software, dmxconfig, dpl..) and also the type of image (bitmap,jpeg, pcx,etc..). With Datamax printers, 4 types of image can be used: bitmap,pcx,img, and 7bit datamax image file. Another thing to know is that the image must be a black & white, monochrome image. You can use a program like microsoft photo editor to make this change. You can use DmxConfig, Utilities.exe, & DPL (datamax programming language) to load image to printer. Let me know the answers to my above questions to proceed with solution.
I've printed images over 500kb. Can you print a small image? If not, perhaps the driver is the problem.
If you're trying to send a text file of IPL commands to the printer, set up a Generic Text printer driver, to to send the file as ascii characters instead of as a graphic image. You can set this up in addition to your Intermec driver.
Go to Printers and Faxes, Add Printer, Next, Select the Port, Select "Generic" Manufacturer, "Generic / Text Only" Printer, and give it a name like "Text". Cycle the printer power to clear previous attempts, then print the file to this printer name.