I had the same problem with my fargo dtc 550.
I changed the "O" Ring rubber attached to the printhead and that solved the problem. No more head lift errors.
well can some one shwo me how to chage the O" ring rubber please I have the same problem with the lift head error
this is my email
[email protected]
many thanks in advance
Kindly let me Know if you if and how you sorted out this problem? Reply to Fred on this e-mail address. [email protected]
Guys,this time it is a fargo hdp 5000 with the similar error HEADLIFT ERROR # 103. With this error detail "The headlift sensor is not detecting movement from the Headlift Scan.and it says "Reboot the printer by cycling power.I;m so Desparate.Kindly share SOLUTION WITH ME JOHN ON EMAIL:[email protected]
×
Try opening the top portion of the printer then push it down again. the sensor might be detecting that the head is open
9 out of 10 times it's a broken o ring on the head lift motor. I get parts from www.laminex.com
My dtc 550 complains CARD HOPPER CALIBATION
4,986 views
Usually answered in minutes!
×