Question about Canon NP 6050 Copier

1 Answer

Purging the memory

I wanted to use the current NP6050 that we have for classified reproduction. It isn't connected to a server, but I also don't know if it can be purged. Any suggestions.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Expert
  • 287 Answers
Re: Purging the memory

Hello Jim.I would like to help you but I am not quite sure I understand your need. The Canon NP6050 is an analog device that cannot be networked. And it does not have a hard drive that might retain any information from previous copy jobs. This device does have a small amount of memory to retain custom copy settings, user codes, timers etc, but really no ability to retain and store documents in the manner I believe you are concerned about.So the need to "purge" this device (if I understand your concern) does not apply. I hope this helps, but if I missed your point or can be of further assistance I will do so gladly.

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can I connect my epson dx4450 direct to my router

This model printer has only an USB printer connection and cannot connect into a router unless the router has an USB printer connection OR the printer is connected to a print server, then the print server is connected to the router.

Mar 09, 2012 | Printers & Copiers

1 Answer

How do i connect to the scanner.I have this connected for the printer,now i need items scanned to send e-mail don't know how to do this

It all depends on how your set up is. If you are connected through USB, you will need to download the twain driver from the Kyocera website. Then you can utilize any scanning program that you wish to collect the document image.
If you are connected through ethernet, it's a little more complicated. The first choice you need to decide is what you want done with the document image after it has been acquired. There are three main choices: Upload to FTP server, Send to a folder on a computer through SMB, or email.

All three of these options are obtained through the Kyocera Command Center software installed on the printer. Point your browser to and you can login. If it asks for password, the unit ships with password "admin00", so that should get you in unless someone changed it.
You can adjust the settings through this screen. Head over to the "scan" tab, and you can put in the information for whichever way you want it. If you decide on Email, you will notice at the bottom of the page a link to set up the SMTP options for sending the emails.
Another note with email: you will need to set up a DNS server in the TCP/IP section under "Basic" settings. If you don't have a DNS server on your network, you can utilize universal ones. I recommend using Google's DNS servers ( &

Sep 21, 2011 | Kyocera FS1128MFP AllInOne Laser Printer

1 Answer

Hi, I have brought my dell laptop at work with vista operating system. It connects to internet networks wirelessly. I am trying to connect the work printer to my laptop but am not sure how to start. The...

you do not need a CD to connect to the printer, what you should do is gain access to the print server. this can be done by asking your network administrator. in a situation where you don't have one or the network is an open one, you have to connect to the printer network, open your ipv4 properties and select obtain an ip address automatically, do the same with the DNS server and you're good to go.
just so i'm thorough, after connecting to the print server / network, you can access your network ipv4 properties by right-clicking on the network icon located at the lower right corner of your taskbar, (the bar at the bottom of your screen) usually in form of two computer monitors. select network and sharing center after right-clicking. a list of wireless network should be available if there are more than one wireless networks in the area. select view status of the print server / network, click on properties, a pop-up box appears. be sure 'file and printer sharing for microsoft network' is checked, double-click "internet protocol v4 (ip/tcpv4)' select obtain an ip address automatically, select the same for the dns server below. click OK you're good to go.
once you are successfully connected to the print server, click on Devices and Printers from the start menu, select the printer and allow the drivers to be installed from the server. once that is done, you can right-click on the printer and select set as default. after this all you have to do is connect and print whenever you want to.
hope this helps
let me know if there's anything you don't understand or if this doesn't resolve it.

Jul 18, 2011 | HP LaserJet P4015 Printer

1 Answer

I want to know the price of canon copier 6050

The Canon NP6050 is too old machine for wichCanon stop distributing spare parts, so It doesnt worth nothing - these is only my opinion.

Rather buy new canon copier i.e. ir3235, its good, its new, and you have waranty.

hope that helped

Jul 18, 2010 | Canon Printers & Copiers

1 Answer

I want to get some help about canon np6050 error

Hello jig,
I wish to help you quickly as you are down. I dont have immediate access to the older analog service manual and Canon no longer keeps it on their website.However, E005 has been a common error code for many products, if not all. It means that the cleaning web (which is an item that is "used/consumed "normally as the copier is used.) has run out.The copier should have been diplaying (in small letters on the dispay) "WEB LOW" for quite a while.It needs a new cleaning web.An untrained end user could change this but without instruction most people would not be able to. Its located in the fuser area onder a yellow cover. I bet you can do it !

Apr 09, 2010 | Canon NP 6050 Copier

2 Answers

MFC-240C printer head repair


Nov 11, 2009 | Brother MFC 240C All-In-One InkJet Printer

2 Answers

Xerox Workcentre m20i - tcp/ip

Good evening niebs, The first thing I would do is eliminate the network connection as an issue. The easiest way (if you don?t have a network testing device) is disconnect the network cable from the printer and connect a laptop. Then configure the laptop using the same IP, subnet mask, gateway and DNS server IP you used in the printer and test for a good network. I would make sure I had Internet access on the laptop as well as the ability to ping. This test has the added effect of ensuring these numbers are in fact correct. If you have eliminated the network connection the next thing to check is the person who configured and maintains your network and servers. Checking with them will eliminate the possibility that they have setup the network to prevent anyone from connecting network devices without permission. By default I prevent my switches from allowing people to plug in other equipment that isn?t registered with me. That trick has saved me from a lot of problems over the years. You mentioned resetting the Network Interface Card (NIC) but I would go a step further, restore the factory settings on the entire machine and start from scratch. You might want to check with your network administrator to find out what you network switch connection speed is set to. If it?s set to auto make sure your print server is as well. If that doesn?t work try setting your print server to 10Mbps, half-duplex. I?ve had some problems in the past with auto not working correctly on print servers. If this printer is still under warrantee then I would get on the phone and contact the help desk, you might just have a lemon. Let us know how things go and please don?t forget to rate the posting.

Jan 03, 2007 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

Printer don?t print

Hi, the problem can be related to any of a number of things. First of all make sure that there isn?t any extraordinary LED blinking. Every LED has a troubleshoot in the manual(which you can download here on Fixya). If there?s no blinking going on check for the following: The power supply to the printer, along with the line(cable and socket). That the ink cartridges fit well. You have paper in the tray, and there?s none stuck inside. The printer cover is well shut. All parts are well connected(such as the paper tray) If everything seems to be in order try connecting it to another computer? maybe the USB connection isn?t a 100 percent, and the communication between computer and printer is at fault, or there?s some software problems, or anything that?s computer related. Could also be router or print server problems if you are using either one. Check out the troubleshoot pages for your router here in Fixya, they contain reference to that on some routers.

Feb 21, 2006 | HP DeskJet 845c Printer

Not finding what you are looking for?
Canon NP 6050 Copier Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

94198 Answers

old marine
old marine

Level 3 Expert

1317 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides