Question about GE Spacemaker JVM1750 Microwave Oven

1 Answer

The microwave oven does not have power to the panel.

JVM1750 Spacesaver Microwave Oven
The microwave oven does not have power to the panel. What could be the issue? I used the microwave and the next time I opened the door it did not have light inside no clock on the panel and the buttons do not respond. Is there a reset button somewhere or a fuse in the microwave? I have checked the outlet where the unit is plugged into and there is power to it.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

HI, this will require the skilled hands of a qualified GE tech. the damaged part here is the Magnetron assembly. this is a very sensitive part that creates radiation and the heating process as well. you will need to replace this device asap if possible.

Posted on Jul 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the reset button located on spacesaver micro wave oven

  • locate the microwave's power supply cord.Remove the power supply cord from the wall outlet.Wait one to two minutes.Re-insert the power supply cord into the wall outlet. The microwave is now reset.

  • Mar 24, 2012 | GE Spacemaker JVM1640SJ Microwave Oven

    1 Answer

    I have a new JVM1750 just installed yesterday. There was some arcing, in what looked like underneath, a white circular disc in the ceiling of the internal cavity. Have checked for foil - none inside the...

    That is your stirrer cover.

    Any arcing there is usually due to grease or food particles, so on a new oven that would be as mystery.

    But any time you get arcing under it, it has to be removed and cleaned.

    Oct 12, 2011 | GE Spacemaker JVM1750 Microwave Oven

    1 Answer


    fuse is usually located behind touch panel on or near computer board

    Dec 25, 2010 | GE Spacemaker JVM1750 Microwave Oven

    1 Answer

    Ge psacemaker microwave oven no working it started with a sensor error and the message change to F3 and beeping. I unplug and plug its still same error.Model JVM1750. What does F3 message stands for?

    Key panel (touch pad) shorted This code will occur if a shorted key panel is detected
    continuously over 60 seconds. Replace key panel (also called touch

    Dec 19, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

    1 Answer

    GE spacesaver xl1800 microwave. Unit comes on, but no heating

    Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

    Microwave Oven Basic Troubleshooting Tips



    Jun 06, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

    1 Answer

    The microwave turns on when the door handle is

    Hello :

    If there is any resetting button , then press it to reset your Microwave oven . If that didn't solve the problem , then I recommend you to replace it if that's possible or just take it to the service since you still have to guarantee .

    good luck .

    rate please !

    Mar 23, 2010 | GE Spacemaker JVM1750 Microwave Oven

    1 Answer

    Need to remove ge JVM1750

    You can download GE owner's manuals and installation instructions here.

    We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

    Oct 05, 2009 | GE Spacemaker JVM1750 Microwave Oven

    1 Answer

    Spacemaker Microwave Oven

    F3 means shorted key panel. You get prompted with F3 error if a short on key panel is detected for over 60 seconds.

    Test key panel wiring and eventually replace key panel.

    Enter the model number on one of two websites below to get parts and diagrams for your appliance:

    Appliance Parts From PartSelect

    Appliance Parts Pros

    May 17, 2009 | GE Spacemaker JVM1750 Microwave Oven

    Not finding what you are looking for?
    GE Spacemaker JVM1750 Microwave Oven Logo

    Related Topics:

    377 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GE Microwave Ovens Experts

    William Miller
    William Miller

    Level 3 Expert

    9085 Answers


    Level 2 Expert

    225 Answers

    D. E. Hev

    Level 3 Expert

    1175 Answers

    Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides