Question about HP LaserJet 3050 All-In-One Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If you scanner error 5 or printer hangs at scanner bulb warming up than the issue is with Scanning Assembly inside the printer and it is hardware issue.
Posted on Jul 02, 2009
SOURCE: hp laserjet 3055 scanner error 6
Try these steps.
52 Scanner Error The all-in-one has experienced an internal
1. Turn off the power by using the power
switch, and then wait at least 30
2. If a surge protector is being used,
remove it. Plug the all-in-one directly
into the wall socket.
3. Check the FFC connection between the
formatter and the scanner.
NOTE Do not bend or fold the
FFCs during the removal or
4. Try connecting the product to a different
power source or surge protector.
5. Turn on the power and wait for the all-inone
6. If the error persists, replace the laser scanner assembly
Hope this helps
Posted on Jul 10, 2009
This is a service repair error.
These steps you can try yourself, else you have to get to a HP repair centre:
You can perform a "NVRAM INITZ"
Follow these steps
-switch off the printer, then remove all cables connecting to the printer but just the power cable.
-then press and hold the *(start/symoble) and 5 button togather and turn on the printer.
-continue holding the button till you see "perment storage init" displayed and releas the button.
-then at a given point of time the printer will ask you to change laguage,time,date etc.
if this does not sort the issue service is required.
Posted on Jul 25, 2009
SOURCE: PCL XL error in hp laserjet 3055
information about the cause:
PCL XL error pages that print from an HP LaserJet 1200, 1300, 2200, 2300, 3200 or 3300 series product when a PCL 6 printer driver is in use typically indicate a communication issue. Sometimes this issue is caused by an incompatibility between the Enhanced XL language and the software application.
You can find the solution for this error here:
(It's a long instruction page, I advise to copy the sections that refere to your OS to a separate document, so you don't miss any step)
URL to HP service page:
Posted on Aug 29, 2009
Tips for a great answer:
Jul 06, 2015 | HP LaserJet 3052 All-In-One Printer
Jan 15, 2010 | HP LaserJet 3055 All-In-One Printer
Nov 17, 2009 | HP LaserJet 3055 All-In-One Printer
Apr 12, 2009 | HP LaserJet 3055 All-In-One Printer
Dec 16, 2008 | HP LaserJet 3055 All-In-One Printer
Apr 27, 2008 | HP LaserJet 3055 All-In-One Printer
219 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: