Question about Air Tools & Compressors

1 Answer

I am missing the screw in drain plug for a Model 95386 air comp.

I am missing the screw in drain plug for a Model 95386 (2hp 8 gal)air compressor. How might I find a replacement. As I was draining the tank the plug blew out and now I am without. Help please. This is a Gen Pneum. Air Comp.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

This is normal item at parts house, anyway why do have a plug. i put a small ball valve much better i got at home depot

Posted on Jul 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I did not drain the tank on my 80 gal comp now trying to drain I only get a trickle out of the drain line. Help


Take drain plug completely out of bottom of the tank and remove the outlet plug on the side of tank. pour 1 gallon of clean water into tank and stir up sediment. . Replace the side plug and start compressor , keep this up until drain water runs clear not orange. Then re install everything and check tank pressure and for leaks.

Apr 15, 2013 | Ingersoll Rand Ingersoll-Rand 80 gal. Air...

1 Answer

I have a 2hp twinstack air compressor model IBM# 606-4349. The pressure switch (part # 58) will not sut the compressor off theeby blowing the relief valve. The compressor is brand new. my e-mail is...


Hi wl, my name is John. Welcome to FixYa. You need to replace the pressure switch. You can get it here. www.mastertool.com . Make sure to unplug the cord from the outlet. Remove the two screws and air line, disconnect the wiring. Install is reverse of removal. Thanks for choosing FixYa. Good luck, and Happy Holidays.......John

Dec 16, 2010 | Mintcraft Air Compressor 1 HP 4 Gal

1 Answer

How much oil for 2hp 8 gallon central pneumatic air #95386


i'm not sure of the solution but what type of oil did you use?

Apr 10, 2010 | Air Tools & Compressors

2 Answers

I need a drain plug for a Clarke Air pancake two horse compressor. Model AC2001 Serial # 1005188 Where can I locate one? Dan


Master tool repair is a good web site to get things like that, they sell a lot of generic parts like that

Dec 29, 2009 | Clarke Power Products Inc AC2001 2HP 4...

1 Answer

Ingersoll rand compressor oil leak (Model DD2T2, 4.5 Gal.)


The brass fitting that goes into my DD2T2 seems to have a hole in it and it looks impossible to remove without ruining a major gasket due to the close tolerance in replacing the fitting. Am I missing something?

Mar 09, 2009 | Ingersoll Rand DD2T2 T Win Stack Single...

1 Answer

Need to replace drain valve


The "welded nut" is the pipe fitting into which the drain valve or drain plug is screwed. It's usually brass and the valve or plug can be obtained through Sears or possibly and good harwarde store. Be sure to use pipe sealing compound or teflon tape on the threads when you re-install the valve or plug.

NOTE - THE AIR MUST BE DRAINED FROM THE TANK BEFORE REMOVING THE VALVE OR PLUG. ALSO, POWER SHOULD BE DISCONNECTED FROM THE COMPRESSOR!

Mar 04, 2009 | Craftsman Air Tools & Compressors

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...