Question about Televison & Video

1 Answer

I need a power source adapter for my Nortech

I need a power source adapter for my Nortech Media E-DVKIT003
output +9.5V 3.33A
Model MPA-690A
When I plug in my power source adapter nothing happens. The little red light doesn't come on. I have tried several plugs in my house too see if it could be the wall plug in but nothing happens and there is electricity to the wall outlets.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a similar unit with tandem DVD's.
Chances are that your power source is good and the problem is the power port on the side of the unit. Both of my units have a broken post on the back of the circuit board. I've tried to solder them with limited success. One lasted two weeks, the other has brought me to this site looking for a service center. I'm sure it's a poor manufacturer design that puts too much stress on the solder post.

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I Charge my Sony Ereader


it may take a certain battery like oprah had on her show check to see if it needs a battery or look it up on the web.

Jan 01, 2011 | Sony E-reader Portable E-book MP3 Player

2 Answers

I no longer have power to my monitor; is there a way to check power source or, if necessary, to buy a new power source pack?


You can measure the adapter output with a voltmeter. The output should match the voltage marked on the adapter. This model uses a 12-volt adapter.

If the adapter doesn't have any output, it may be because the wire has broken inside the cable near the plug from flexing. It's possible to repair this by soldering on a new plug. Sometimes it's tough finding the right plug, though; some brands of equipment use oddball sizes.

You can also purchase replacement adapters. Several sources came up after a search for "scanport n9 adapter". Here's one on eBay. You'll be able to find what you need.

Mar 05, 2010 | Scanport N9 19" LCD Monitor

2 Answers

AC Adapter


You can buy a new NORTECH MEDIA E-DVKIT003 wall ac adapter by clicking on the hyperlink:
buy replacement wall ac adapter power charger cord for NORTECH MEDIA E-DVKIT003 PORTABLE DVD PLAYER

Mar 13, 2009 | Televison & Video

1 Answer

My battery won't charge on my Nortech E-DVKIT003 Portable DVD pla


You may need a new battery. How long have you had this one?

I hope this solution helps.

Feb 11, 2009 | Durabrand PDV-709

1 Answer

Missing power cord


You can get an after market ac adapter charger for the E-DVKIT003 dvd player here.CLICK:


AC ADAPTER E-DVKIT003

Dec 19, 2008 | Durabrand PDV-709

1 Answer

Rechargable battery for nortech media 10.2 inch dvd player


might be able to help u,
My DVD player "died" on me, company told me no parts for this unit. Was going to "file 13" the player but decided maybe somebody might need some parts out there. My Player is a Nortech Media Model E-DVKIT03. Got a remote, ac adapter, av cord and player itself. Will give them away free to first person who emails me @ chizzboys@msn.com.
Just need to get rid of them.
Thanks

DBighorse

Oct 21, 2008 | Durabrand PDV-709

1 Answer

MPA-101 Amplifier powers on, receives source signal, the fuse is not blown inside, but no sound comes out of the amplifier. The amp is pretty new, doesn't even have dust inside the unit.


Hello, is this a Radio Shack PA amp or Jamo amp? The unit is probably in "Protect" mode. Is this a PA system or a receiver...receivers have a protection circuit that will not let the speaker relay activate if the amplifier output section is shorted and sending voltage towards the speakers...so they won't fry!!The speaker relay should activate within 3 to 5 seconds if your output section is ok.

barneyluc

Oct 13, 2008 | Audio Players & Recorders

1 Answer

Monster MPA 5150SS


Might be a failing semiconductor component (usually an old transistor) in the amplifier's front end. This caused by the oxidation through the component legs or pin. I usually touch and move each transistor's body to exaggerate the noise. You can research also what kind of noise is it producing- intermittent, static, etc.
hope this helps..

Sep 20, 2008 | Monster Cable MPA 5150 SS Amplifier

4 Answers

Need replacement car adapter


Item number: 260123773606

on ebay

Dec 29, 2007 | Durabrand PDV-709

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74118 Answers

Cindy Wells

Level 3 Expert

5101 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...