Question about Canon PowerShot G2 Digital Camera

1 Answer

Canon PowerShot G2 buttons don't work

The camera turns on normally and you can take a picture, but none of the buttons work. The LCD displays your picture, but you cannot scroll to an other picture. You cannot bring up the menu or change any of the settings controlled by the buttons on the back of the camera. Also, if you zoom in, you cannot zoom back out.
The camera worked fine the last time I used it. Today I went to use the camera, charged the battery, and had the failures.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

You have a bad button board . This is a single board with a series of small button switches that control all these functions. Most repair shop will charge around 75.00 to fix.

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewfinder is dark until picture is taken.


Have you tried pressing the display button ? It should switch from LCD to viewfinder.

Jan 26, 2013 | Canon PowerShot G2 Digital Camera

1 Answer

Hi,i can't get my pictures on my laptop because i have lost my cd that sets every thing up.please could you help solve my problem for my camera canon G2 powershot pc1015 thanks regards jabs.


If you used a memory card, take it down to CVS pharmacy or the equivalent, and have your pictures put on disk. They normally charge around 1. to 3. dollars, depending on how many pictures you have on your camera.

Nov 07, 2010 | Canon PowerShot G2 Digital Camera

1 Answer

Camera's screen is black, but still takes pictures.


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, try pressing the DISP button once with the camera turned on.

Dec 18, 2009 | Canon PowerShot SD1100 IS Digital Camera

2 Answers

Blank screen


Sounds like you accidentally pressed the DISP (Display) button on the back of your camera. This manually turns the screen on and off in picture taking mode to save battery power. You could then use the optical viewfinder in its place. To turn it back on, just the DISP button one more time.

Jul 07, 2009 | Canon PowerShot SD600 Digital Camera

1 Answer

SD300 LCD Display Shows Same Image


Sounds like it needs service. Call Canon tech support.

May 28, 2008 | Canon PowerShot SD300 / IXUS 40 Digital...

1 Answer

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it...


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. The A570 IS is relatively new. Your camera is likely still under warranty. If so, contact Canon for warranty repair (see the following link):

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2113&fcategoryid=221&modelid=14905

Mar 15, 2008 | Canon PowerShot A570 IS Digital Camera

5 Answers

Lcd screen does turn on


This is a defective CCD problem that is known to Canon. They will replace the defective part for FREE. Go here for more details: http://www.imaging-resource.com/badccds.html

Nov 10, 2006 | Canon PowerShot A75 Digital Camera

1 Answer

White LCD on my canon


Hi: I think you have broken (accidentaly with the fall) the cable with several wires that connect the LC display. My real advice is that you take your camera to a store were they can give you direct support desmanteling the camera and replacing the cable or fixing it. However, Zair already had a problem like yours and the best solutions was given by BowerR64. You can consult on the following page: http://www.fixya.com/problems-solutions/t103443,p294056/Canon-PowerShot-G2-Digital-Camera.aspx (just copy and paste on the address bar) ;) Regards

May 21, 2006 | Canon PowerShot G2 (Black) Digital Camera

Not finding what you are looking for?
Canon PowerShot G2 Digital Camera Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...