- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check back speaker wires! this is protection mode! There is a short circut! look for stray wires touching metal or each other!
if this does not do it then unit will have to be fixed by a pro!
Please use the ratings and help keep this area FREE!
OK this is the protection mode! There is a short circut! unplug and check all back speaker connections making sure no stray wires are touching metal or each other ! if this does not help the short is inside of unit and will have to be fixed by a pro!Please rate my answer and help keep this area FREE! THANK YOU!
Don't buy a stereo that prints up 'PROTECT MODE' and then does not tell you how to cure it. This is a good way of getting people to buy a new one only live and learn do not buy the same manufacturer again. I have a nice just out of warrenty JVC that when I switch it on sits there grinning at me with 'PROTECT MODE' showing. Yes I have entered cash protect mode and decided I am not going to buy another JVC.
your problem is your linear intergrated amplifier chip has blown, or has dry joints. causing you system to go in to protect mode which stops more damage being caused and fire not occurring. if you have no technical back ground in electronics, then i wouldnt attempt repair yourself. if you have take cover off and on the long metal heat sink there is a black like box with between ten and thirty legs going in to circiut board thats your problem, theres a code on the front of it with 2 or 3 letters then a number, thats your part number they range in price from between £7.00 to 50.00 pounds.. hope this helps
Most likely he has a couple of the connectors crossed. It is going in protect mode to keep it from damaging the internal electronics. Open it back up and double check all connections. then let me know.
I have this stereo and so do 2 friends. We've all had the same problem but I turned my stereo into a certified repair shop and they fixed the problem. I think something on one of the PCB's inside the unit misaligned. I didn't pay more than $50 for the repair. There was no major repair they told me.