Question about Kyocera Mita FS-C5016N Printer

1 Answer

Solution for "c30 code on Mita DC 1255 - Kyocera Mita FS-C5016N Printer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

A C30 code is as follows straight from the Tech Manual.
.Timing switch fails to turn ON 2.5
sec after scanner motor starts to
turn in normal direction.
.Home position switch fails to turn
ON 6 sec after scanner motor
starts to reverse.

Solutions:
.Defective scanner motor
.Defective timing switch
.Defective scanner motor
.Defective home position
switch

Also check the scanner rail some of the seals on the rail around were the motor sits turn to gunk and will stop the scanner assy from moving.

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mita-1560 has Error code C20 ?


MITA DC 1560 2050SM Service Manual free download schematics datasheets... Use internet explorer, save all pdf's to one folder then click on the first one which creates the final complete pdf then click on that one to view the service manual.

Oct 31, 2014 | Kyocera Mita Office Equipment & Supplies

1 Answer

My copier mita dc 3060 showing error code c 210


Hello Manuel sorry for your machine to be in that stake but have you tried to check on that paper conveying motors because that error is for those lift motors try to go on your machine run this code
press status/job cancel
enter 1087*2 twice
enter 906 and then you will see execute
the you press start to see whether it will stablize

Sep 25, 2012 | Kyocera Mita Toner 37085011 for DC-3060 &...

1 Answer

Where can I purchase a Cleaning Kit for my Mita DC-1435?


Hello, Glen.

Here's a link for a cleaning blade:

http://74.125.113.132/search?q=cache:UtkZ_0m7QVwJ:www21.shopping.com/xPO-DRUM-Cleaning-Blade-73918030+Mita+DC-1435+%22maintenance+kit%22&cd=1&hl=en&ct=clnk&gl=us

And, here's a link for Kyocera-Mita maintenance kits, but the specific model is not listed. You'll need to contact them at 877.813.7201 or email info@worldclassink.com to see if there is a kit for your specific model:

http://www.worldclassink.com/Cheap-Kyocera-Mita-Maintenance-Kit-m43-ift6.html

Hope this helps.

Feb 11, 2010 | Kyocera Mita Office Equipment & Supplies

1 Answer

What kind of power cord should i use for Fargo Persona c30 printer


For your fargo persona C30 you need a power adopter of folowing rating description:

input: 100-240V -2A, 50-60Hz AC
output: 24V/2.5A, 60Watt max DC

Aug 21, 2009 | Fargo Persona C30 Thermal Card Printer

1 Answer

Kyocera mita dc-1460 need parts


You might try to contact a Kyocera-Mita or Copystar Dealer in your area. But I don't think anyone will have those parts.

Jul 29, 2009 | Office Equipment & Supplies

1 Answer

Error code 260 for a MITA DC 6090


its a problem in your cooling and drive system... consult kyocera for an explanation of this code...

Mar 15, 2009 | Kyocera Mita Kyocera-Mita SCANNER RACK...

4 Answers

Mita error code


I think that stands for OPEN. Check to make sure that all the doors are closed. Right side, left side door, and also front door.
Hope this helps.
If you still have the OP message, then let me know and I will dig out my books and look it up.
Good luck.
Mac

Mar 12, 2008 | Office Equipment & Supplies

2 Answers

Mita DC-1205 Copier


Open the front door... on the right is your toner. It is a cartridge that inserts long-ways (front to rear) into the machine, and should be white or ivory in color. DO NOT remove the old toner cartridge without having a replacement on hand. The new cartridge will have a plastic "cover" on it that assists in releasing the toner cartridge locking tab, and "seal" the old cartridge as you remove it from the copier. The cartridge opening is face down upon installation into the machine, and you may get some spillage if you remove it without the cover. DO NOT remove the new cartridges mylar seal until AFTER you install it in the machine!!! There should be a picture label inside the front cover showing how to replace the cartridge. And there is a pictorial diagram on each new toner cartridge box also detailing this.
Use only MITA DC 1205/1255/1415/1435/1455 toner, OEM #MTA37041013. Should run you about $12-$14 per cartridge retail, or cheaper if shopping around (I sell them for $11.99). Do not use copystar brand for the same equipment. Although it's the same toner, the shape of the cartridge is slightly altered, and may not "fit" into the machine. I forget how it goes, either Copystar will work in Mita, and not the other way around, or vice-versa. Either way, better safe than sorry.

Oct 24, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Kyocera Mita FS-C5016N Printer Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Henry Gertcher

Level 2 Expert

48 Answers

AAAA262430

Level 1 Expert

47 Answers

Are you a Kyocera Mita Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...