Question about Dell 1470 (W9284) 802.11a/g/b Wireless Adapter

1 Answer

Dell TrueMobile 1150 won't connect to secured wireless acct.

Dell TruMobile 1150 Wireless LAN MiniPCI Card will not connect to WPA personal secured wireless account

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 127 Answers

Well! some wireless adapter`s are not capable of connecting to higher security so that`s why for that it`s recommended you use WEP security instead of WPA.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell NetworkDell Wireless 1350 WLAN MiniPC


The Dell Wireless WLAN Card Utility locates, manages and provides information about wireless networks in your area.
The Dell Wireless WLAN Card Utility allows you to create network profiles, connect to an available network, and diagnose connection problems.
Enable the utility through an icon in the notification area of your desktop, or locate it in the programs list depending on which Dell computer you have.

Turn on the Dell laptop and make sure the wireless switch is in the "On" position.
Right-click the utility icon in the notification area of your desktop.
The icon appears as a set of four green, yellow, red or white bars, depending on the signal strength in your area.


Click "Enable Radio."


Right-click the icon and click "Open Utility" to open the Dell Wireless WLAN Card Utility.

Control Panel

Turn on the Dell laptop and make sure the wireless switch is in the "On" position.


Click "Start" and select "Dell Wireless WLAN Card Utility."


Click the box next to "Enable Radio" and click "Apply."


Click "OK."

http://support.dell.com/support/edocs/network/p70008/en/utility.htm


http://support.dell.com/support/edocs/network/p70008/en/wizard.htm

Jul 05, 2013 | Dell NetworkDell Wireless 1350 WLAN...

1 Answer

Need ssid num off my trumobile router


That is the name of the router. Default name is wireless.

http://support.dell.com/support/edocs/network/R48972/en/config/index.htm


SettingDefaultUser NameadminPasswordadminDevice Namemy.routerIP Address192.168.2.1Subnet Mask255.255.255.010/100 Ethernet LAN IP192.168.2.110 Mbps Ethernet WAN IP<obtain from ISP via DHCP>WAN DHCP ClientEnabledESSID (wireless network name)wirelessChannel6EncryptionNo EncryptionDHCP ServerEnabledNAT RoutingEnabled

Oct 25, 2012 | Dell TrueMobile 1184 Wireless Broadband...

1 Answer

WAP/WEP password not working


These are the two options for your Router. Don't forget to save your settings

WPA is an upgrade to the WEP (Wired Equivalent Privacy) standard for securing your wireless network. If you would like to secure your wireless network using WPA, you will need the following:

  • WPA enabled on your Dell TrueMobile 2300 Wireless Broadband Router

  • WPA support for your wireless clients. If you are using a Dell TrueMobile wireless client, you can check for the availability of WPA enabled software update for your wireless client at http://support.dell.com.


  1. Log into the Web configuration of your router at http://my.router (or the default address http://192.168.2.1)
  2. Click on Basic Settings.
  3. Click on Wireless Security.
  4. Click on the Enable Wireless Security checkbox.
  5. Select either WEP or WPA in the Network Authentication list.




To setup WPA
  1. Enter your pre-shared key. This key must match the key that is used by each wireless client computer associated to your router.
  2. Choose a key format. This can be hexadecimal digits (0-9, A-F) or ASCII characters (any key on the keyboard).
  3. WPA Group Rekey Interval specifies how often the key rotates or changes.
  4. WPA Encryption allows you to select 1 of 2 possible encryption methods (TKIP and AES) - choose one that your wireless clients supports.
  5. Click NEXT, then Save and Restart to apply the changes.
  6. Setup the WPA on your wireless clients. Refer to the documentation that accompanied your wireless clients, or your wireless clients on-line help system for information on how to setup WPA.

May 14, 2012 | Dell TrueMobile 2300 Wireless Broadband...

2 Answers

Is there any solution to get WPA2-PSK/TKIP support for my eldery Acer TravelMate 800 with Intel PRO/Wireless 2100 LAN 3B MiniPCI adapter?


Please keep the same type of encription on both laptop and DSL wireless modem.

Please let me know for any further requirement
If you satisfy with my solution please rate/vote for me.
Rating/Voting will encourage me to help others

Jun 14, 2011 | Computers & Internet

1 Answer

How do i download network adapter for my dell tower, its service tag is C0WST21


please page the URL below in your browser and click download button.

http://download.cnet.com/Network-Dell-Wireless-US-WLAN-Network-Adapter-Card-Wireless-1370-802-11-b-g-WLAN-MiniPCI-Card-Wireless-1350-802-11b-g-WLAN-miniPCI-Card-Wireless-1450-802-11a-b-g-Dual-Band-WLAN-miniPCI-Card-Wireless-1350-WLAN-802-11b-g-PC-Card-TrueMobile-14/3000-2112_4-109107.html

Feb 19, 2011 | Dell 04U852 Network Adapter

1 Answer

I get a full wireless signal but when its connected to wireless there is no internet. The internet works when connected (ethernet) by bypassing the router, but there is no data transfer wirelessly.


The wireless router most likely has been configured with WEP or WPA or WPA2 encryption key.
Unless you configure the wireless card in your computer with the router's encryption key the computer cannot connect to the router by wireless.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 25, 2011 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

I have a new Belkin Surf n300 (F7D2301 v1), it functions fine with wireless connection to Windows Vista and XP PC's, using WPS and WPA-Personal security; however, I am unable to connect via wireless using...


If you dial back the security to WEP, does it connect?

Back to WPA though... when editing the Network Connections... Check SSID is correct. Mode "Infrastructure". IPv4 Settings is Automatic (DHCP). IPv6 Settings method is Ignore. Wireless Security is WPA & WPA2 Personal and the password is correct.

Sep 02, 2010 | Computers & Internet

1 Answer

Epson sx510w prints using a cable but can't get it to print wireless


The specs for your model Epson allows you to connect the you network by wireless and by LAN cable.

The specs are as follows :-
Wi-Fi Wireless LAN IEEE 802.11b/g – compatible with 802.11n*
*Transmission rate will be limited to 802.11g and will operate in the 2.4 GHz frequency band
Ethernet Wired LAN IEEE 802.3 (100BASE-TX, 10BASE-T)
Other PictBridge
Wireless security
WEP – 64bit
WEP – 128bit
WPA – PSK (TKIP) – compliant with WPA2
WPA – PSK (AES) – compliant with WPA2

To connect the printer by a LAN cable you need to configure the Epson for an IP address that suits your network configuration and connect the LAN cable to your wireless router/hub.

The reason why you cannot print using wireless is because the wireless configuration in the Epson is not setup with the router's wireless configuration ie. SSID WPA encryption etc.

For instructions of setting up a LAN network printer, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3668797-setting_up_shared_network_printer

For instructions on setting up a wireless printer, the Epson wireless settings need to be configured with the router's wireless settings. Go into your router's wireless and note the SSID, and encryption settings etc and configure the Epson's wireless settings with the router's wireless settings. This will allow the Epson to connect to the wireless router. Please click on this link for instructions to secure your wireless network, configure the wireless router (if you have not already do so) and configure the wireless card in the computers and wireless printer (the instructions for configuring the wireless card in the printer is the same as for the wireless card in the computers via the printer's menu screen).
http://www.fixya.com/support/r3559128-wireless_router_security

Feb 07, 2010 | Epson Office Equipment & Supplies

2 Answers

I reloaded XP Dell Latitude D630 can't get online


Try uninstalling your wireless driver/deleting it then reinstalling.

Oct 07, 2009 | Computers & Internet

Not finding what you are looking for?
Dell 1470 (W9284) 802.11a/g/b Wireless Adapter Logo

Related Topics:

776 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...