What is trabon Lubrication?

Industrial lubricants market is full of options today. From a variety of automotive & industrial lubricants and specialty products & lube additives, all kinds of lubrication needs are met here. Oil lubricator is a unique blend to enhance performance of the machine & equipment's.

Trabon lubrication provides the society with one of the best solutions to cope with one of the leading threat to the profitability of the machineries. In an age like this, where businesses are mere dealing of machines, friction is known as a hurdle to get good profit. It can endow the society with excellent choice.

check out the post right here : Home FDJohnson

The Turbon Lubrication products come with special qualities that help cater to the requirements of heavy duty machines. Qualities like low boiling point which helps the parts to maintain the balanced temperature. At times, chances are that the machine might pick up on too much of heat or in low temperatures it might even get freeze.
To know more :

The reason that industrialists are always found so much worried about the lubrication of their machines is that they know about the fact that if their machines would seize than they would be supposed to pay a lot of money for its repairing and maintenance; that is why, they tried their best to get their hands on one of the most advanced lubrication system. Source :
Home FDJohnson

It was proved by sage engineers that lubrication is very much important for each and every single component of a mechanical machine. In order to keep the machines running for long time use trabon lubrication. More Info at : Home FDJohnson

Never Flat Tow any transaxle

Have the front wheels on a dolly

I won't comment any more ,I once owned a trans shop

The lubrication is applied directly to the cutting blades in a back & forth motion right to left. Oil it, then turn it on to work in the lubrication & repeat to make sure everything is covered.

How often you lubricate depends on how often you use the shredder & the type of items you put into it. I would suggest lubricating bi-weekly for moderate use with regular paper. Increase if you are using card stock, plastic cards or large quantities in a single session.

I came across a manual for a Blakeslee f-40 60 80 and here is what it said. Hope this helps

Lubrication
The planetary and spiral-beveled gears are self-lubricated for life. The lubrication used is micromly grease and must be re-applied if gears are replaced. The transmission uses Mobil "delvic 1" synthetic oil which should last the normal life of the mixer. No lubrication is required for the auxiliary drive hub.
If lubrication is applied to the auxiliary hub a grease-like substance will possibly leak out causing damage to the product.
Applications of any lubrication will Void Warranty.

berkelsalesservice.com/PDFs/DD-40_60_80.pdf

I don't know of any small compressors that require lubrication.
I have 3 ranging from a 1 gallon to a 25 gallon and none of them need lubed
Only my 80 gallon 2 stage requires lube