Proform elliptical Why does my elliptical stop in middle of a workout and indicate Low Bat

We are FIXYA dot com. We are not Precor and we certainly don't take credit card numbers. By 'charging bat', you mean battery for the display. The battery is mentioned 67 times in the manual. Press CTRL+F and type in 'battery'. Page 39 and 40, looks to be what you need.

https://primofitnessusa.com/wp-content/uploads/2017/01/V3-precorefx-546i-V3-elliptical.pdf

Links to Precor if you need to buy something?

EFX 546i Elliptical Fitness Crosstrainer - Precor (CA)

www.precor.com > en-ca > efx®-546i-elliptical-fitness-...

Durable 6-phase generator system has no contacting parts, reducing friction and wear, and provides 20 levels to tailor workouts with consistent resistance. The 20 ...

Precor EFX 546i Commercial Series Elliptical Fitness ...

www.amazon.ca > Precor-Commercial-Elliptical-Fitness...

The Precor EFT 546i elliptical has an adjustable cross ramp that allows users to select an angle between fifteen and forty degrees. This allows for isolation of the ...

..

You may be better off calling Icon Fitness and they can help from there .

the cord could be coming loose during use or is bad

I would suggest that there is a wiring fault or dry joint. you need someone who is tech savvy to check inside the head.

DEAR
AT FIRST YOU COUNT YOUR BAT AND MULTIPLY 1.5 THEN YOU USE A ADAPTER AC TO DC WITH SAME VOLTAGE LIKE 6 V OR 9V DC
you can countiue contact us with smart phone on wattsapp or telegram by :
+989195116738

Whereasa treadmill provides an "impact" workout, elliptical machines provide a "no-impact" workout. This makes workouts on the elliptical trainerhave much less stress on the knees, hips, and joints.

see my personall TIPS for to see the schematic.
2) Try to run the software calibration for diagnose and troubleshooting and fix it.
3) The c. breaker can indicate the motor, trafo, capacitor, or board is hot and trip the breaker.

sincerely. God bless you

Dear Sir:
Electronics in consoles can fail at any point like a light bulb. We have spikes in the power supply to our homes which can wear out components over time. If the machine shutting off is there are indication some components in the power supplies is faulty. Test and replace.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Probably is getting overheated.... Also, I have seen some models that stop the workout when the belt is getting too worn out.... Perhaps you should look into replacing the belt. If the screen is losing power too, then it is definitely power failure (in which case, you should examine all the cords and connections.