Question about Dishwashers

1 Answer

Detergent is not desolving

The dishwasher is not letting the detergent out main cover latch

Posted by on

  • 1 more comment 
  • Anonymous Nov 15, 2007

    detergent door opens but soap is not all washed out of the soap dispenser, even tablets are only half disolved and still in the dispenser. Have tried tablets, powder and liquid. Mostly Cascade soap.. Tablets are Electrosol.

  • drodd Dec 11, 2007

    hi, we've got a smeg dwi710 dishwasher with a problem of the detergent dispenser not always opening, have used the manual release button and opens fine without sticking but for some reason when in wash cycle, doesn't always work. the machine is about 4 years old and isn't often used as there is only 2 of us and was here when we moved in. many thanks in advance. Dom.

  • elsaez Jan 27, 2009

    we have a 2 year old kitchenaid that goes through the entire cycle but when we open the door the soap taplet is not desolved and the dishes are not clean...

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Is the cover opening at all during the cycle?

Posted on Nov 09, 2007

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my detergent latch open up while the dishwasher is running?


If neither the detergent flap open or the rinse aid is being dispensed the this is usually down to a faulty or 'open circuit' solenoid that operates the dispensor unit.

Sep 20, 2014 | Maytag Dishwashers

1 Answer

GE Dishwasher Detergent Cover won't latch


You should read the manual of your dishwasher where you will find solution for sure.

Mar 13, 2014 | Dishwashers

1 Answer

Dtergent dispencer does not open



Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.




Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.




Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.




Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.




Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.




Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.




Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.




Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Enter your model number to see parts for your dishwasher.


Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.




Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Enter your model number to see parts for your dishwasher.


Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Enter your model number to see parts for your dishwasher.


Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Enter your model number to see parts for your dishwasher.


Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Enter your model number to see parts for your dishwasher.


Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Enter your model number to see parts for your dishwasher.

Main Control Board


The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

God bless you . see the photo attached.401f2962-5d22-48f3-89be-c1db11d8eabe.jpg

May 23, 2013 | Hotpoint-Ariston FDD914 24 in. Built-in...

1 Answer

Troubleshooting


Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.





Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.





Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.





6717a822-d7e1-4c2e-a0bd-87fdb1bce189.jpg




Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.





Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.





Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.





Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.





Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.






Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.





Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.





Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.





Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.





Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.





Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.





Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Gd bless you

May 23, 2013 | Hotpoint-Ariston FDD914 24 in. Built-in...

1 Answer

Soap doew not disolve


first start the washer listen for it to fill then open the door and see how much water is in it let me know but hold my rating till we finish

Jan 31, 2008 | GE 24 in. GSD3210Z Built-in Dishwasher

1 Answer

Soap does not desolve


check that the spray arms are turning and that the holes in them are not clogged, if you line them up pointing towards the front let the machine fill then as it starts to wash open the door and you should see the arms slowing down, if they are okay then check the water level which should just lap the filter at the bottom

Jan 07, 2008 | Jenn-Air JDB6510 Built-in Dishwasher

1 Answer

Soap does not desolve


I put the wrong dishwasher on my last post.

Dec 01, 2007 | GE 24 in. GSD3210Z Built-in Dishwasher

1 Answer

The cover of detergent dispenser does not open..


It is most likely the flip spring...you need to be certain that the legs of the spring are inside the door edge and the spring does not swing freely...and there must be tension on the spring so that when the latch releases the door flips...you can also try this with an elastic, put the elastic inside the closed door and up around the drying solution knob, this will let the door flip open showing that the latch does work

Nov 11, 2007 | Kenmore 24 in. 15252 / 15254 / 15259...

3 Answers

Detergent dispenser


The opening of this dispenser is controlled by a wax motor for release. If you are unable to keep the latch shut you are probably looking at the spring and latch assy. This is not a hard job, but you have to open the inner door to get at the latch. Part numbers for the spring disp. flap is 912547. The latch (inside door) is 99001291. If you take your time and observe carefully the job will be easy. Catriver, post back.

Aug 08, 2006 | Magic Chef CDB6100 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79186 Answers

Brad Brown

Level 3 Expert

17115 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...