Question about Dewalt D25330K 2KG Sds Plus Demolition Hammer 240V

2 Answers

No hammer i have a 900 k breaker which runs nice but the hammer will not work

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have 900 kango jack hammer motor work but don't jack in sacramento any repair dose work on the jack hammer can you give info who work in sac thanks jim

Posted on Mar 22, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Unit needs to be regreased,it hold about 8 ounces of grease,kango had there own special grease looked like peanut butter,i need the grease hard to explain here were to place grease on the gears and pistons.also take bit holder off and see if unit is full of dirt in the lower end,if its full of dirt.clean oout the dirt and add little heavy grease around the out side of bottom hammer.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hitachi jackhammer runs slow and gets hot


The armature AND electric field must together replaced to get a safe working again, and the defect will not repeat if it be shure have its operating hours on it and give a full service.

May 24, 2014 | Bosch Brute Breaker Hammer 11304

2 Answers

Need Parts List And Service Guide For Kango 990/950 Breaker


If these are the original Kango kangos then you are out of luck. They have been obsolete for many years now and no parts have been manufactured for a long time. The name was bought by DeWalt and they didn't do much with it. The Kango name is now ownd and used by Milwaukee, but there machines do differ alot from the originals. There were a few main models and the main mid sized breakers were the 900 (hammer only) and 950 (rotary hammer) There were a few facelift/variations of each (K, X and B I think) and they did use a couple of different sized seals/pistons/cylinders.
If it is one of the Milwaukee models you can look up diagrams here...
http://www.milwaukeetool.com/

Apr 24, 2012 | Hammering

1 Answer

Hammer action is very weak for kango 900 demolition hammer


Check the brushes. If that doesn't work, try cleaning and re-lubricating. Your local tool rental company may be able to either service it or send it to someone who can (for a fee of course).

Jun 13, 2011 | Hammering

1 Answer

What grease do i use on a kango 900


I believe it is a mobile product, tan in color

Aug 26, 2010 | Electric Hammering

1 Answer

Breaker malfunction- Breaker won't restore power to the circuit


To do this safely you should call an electrician. No way I can give you complete instructions that will be sure to be safe because I can't see exactly what the situation is that you have. But the basic steps include: turning off the main, understanding that you are about to expose the feed lugs TO the main which are still LIVE (and giving them a wide berth!), carefully removing the cover, CONFIRMING that everything else in the box is NOT LIVE (use a non-contact voltage detector - $15 or less), removing the wire from the old breaker, pulling the old breaker out, plugging the new breaker in, connecting the wire to the new breaker (nice and tight), replacing the cover and then turning the main back on.

Jul 27, 2010 | Cutler Hammer Eaton Electical #BD3030...

2 Answers

Schematic diagram of kango breaker 900x


The 900 is a hammer only, the 950 is a hammer drill. the newer ones 950s used spline bits. Unfortunately new parts are no longer available for these great machines. What is your problem.

May 20, 2010 | Hobby Drill

1 Answer

Demolition tool or breaker


The shaft from the motor to the drive gear is likely not working the action of the hammer. There is a gear which spins the gears to achieve the hammer action, suspect the gear is either stripped, broken or both.

Jan 17, 2010 | Dewalt D25330K 2KG Sds Plus Demolition...

1 Answer

Which features are more user Friendly?


accessible power controls, in-line body which provide nice balance in various working positions, power dial which is easy to read and reach and also large and accessible enough to use with gloves on or of.

Aug 27, 2008 | Makita Breaker Hammer with AVT

Not finding what you are looking for?
Dewalt D25330K 2KG Sds Plus Demolition Hammer 240V Logo

1,186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Hammering Experts

John Trevino

Level 3 Expert

1383 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1793 Answers

richie46

Level 3 Expert

12833 Answers

Are you a Dewalt Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...