2 linksys Routers communication problem

To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default PW (write it down and putit in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Yes, the Linksys Wireless-G WRT54G Router will used to connect the computer wirelessly by using the security keys.

You will have different combinations of encryption or security keys.

You will need to check the wireless settings of the router.
If your network is secured then make sure that you are typing the correct network key.
also make sure that the DHCP server is enabled on the router.
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions

1.connect port 1 from the Aztech to the Linksys WRT54G Wan"
Login to the linksys and release/ renew ip
2. once IP is obtained then you should be able to connect.

Find the option on ther routers web interface to allow ping (or ICMP) echos/responses.

It's a security thing on routers and Windows firewalls so that potential hackers cannot verify the existence of your equipment.

Make sure you are connected via hardwire connection. Restart router and select 'Start->Run' and enter 'ipconfig -renew'. If you are still not able to reconnect to router try pressing and holding the reset button on the back. This will restore it to the default settings including username and password.

YOU NEED TO CALL THE 800 # FOR LINKSYS AND THEY WILL CONFIGURE THE ROUTER WITH YOU FOR FREE OVER THE PHONE JUST HAVE PATIENCE THE TECHS ARE INDIAN.

Does the n router have the B/G radios enabled? You have to have G communicate with G. Secondly, do you have the routers configured in such a way they can bridge? If you can't bridge them wirelessly or connect them physically they won't communicate. If this is off base there are also ports that need to be open for the XBOX to connect to XBOX live and this complicates testing, so test on a normal PC with web or ping first.

your starband is if im right the cable modem ? connect the modem to the router and then the router to the computer ? then run the linksys easy connect @ www.linksys.com/support