- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually we remove the hair that we see. This inturn opens up the orifice, and hair follicles, are exposed. When we apply Nohair Lotion ,these are deactivated. That hair, which we do not see, are present below the skin surface at various stages of growth and do not get removed by usual hair removal methods. Some of the follicles are partially deactivated by initial application of NoHair. Hence, repeated applications are required to get a perceptible effect Though even after first application reduction in the re-growth and frequency of hair removal can be seen. Effectiveness of NoHair depends of the effective Hair Removal When the hair is plucked/ pulled from the root. It exposes the core of the hair-manufacturing factory to the NoHair. The active principle of the NoHair damages it permanently. Repeated applications of NoHair after every hair removal sessions effectively deactivate more and more hair follicles. As we are all born with a limited number of hair follicles on the body, the number of hair keep declining
You'll need to setup port forwarding on your router. From a computer use an internet browser such as Internet Explorer. Assuming the router is using default settings.
1) In the address bar type in 192.168.1.1 2) You'll be asked for a username and password. Username is 'admin' and the password is 'password', no quotations. 3) Click on 'Port Forwarding / Port Triggering' on the left side bar. 4) Click on the Port Forwarding radio button. 5) Click the 'Add Custom Service' button. 6) For Service Name call it something meaningful, such as 'PS3. 7) For Service Type choose 'TCP/UDP'. 8) For starting port and ending port use '9301'. 9) For server IP use the IP address of the PS3, you can get this in the PS3 menu under Network Settings. 10) Click Apply
UPnP is supported by your router. On the left side bar, click 'UPnP'.
It may be stuck in the opposite mode of what you are using on the TV like HDMI output or S-Video. To check this press and hold down the power button, you will hear the initial beap once and shortly followed by a double beap. After the double beap immediately remove you finger. You may have to do this once or twice to get the right beap because this is a service menu they do not want you to get into. Once this is done you will have prompts on the tv to change settings to what every output you want. Make sure you change it to the right one and you should be all set.
when you start your pc then any beap is hear how many beaps are there 5 beaps - processor problem 3 beaps - ram problem continues running - ram problem 2 beaps - hdd problem no beaps - motherboard problem firs you clean tour ram whith eraser.the try.