Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Scanning Hello, We've had our 350 for awhile and aside from a quirk or three it usually works pretty well. The issue now is that the computer to which the faxes and scanned docs are sent has bitten the dust. It will not restart, take any type of recovery, etc. We have been through the book, logged onto admin., etc and cannot send items to a different machine. There is only one place where we see the machine's name (network name) and the 350 will not let us change that. All user boxes are listed on that machine (and under it's IP address) but it's IP address is nowhere that can be changed in the 350's setup. Help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Scanning


I believe that you will be able to change that setting by using the web interface for the Konica Minolta.

Open your browser and enter the following: represents the IP address of your Printer.

This should open your configuration interface. In the center of the page there should be a series of tabs: System, Job, File, Print, Scan.

Choose Scan and toward the bottom of your page you should see the destination folder that goes to your now defunct computer. Click on that folder and it should bring up the Job Type Page - yours should be set to File (Scan to PC). Select next and it should allow you to enter the name for the new folder and the IP address for the new computer.

I hope this helps.

Posted on Nov 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hello, I have a Lexmark x5470 and can not scan at all. When put it on scan, it does say it is downloading and after awhile it says can't retrieve. Clem

If scanning was working perfectly before, it could be a minor communication issue. Unplug your printer from your computer. Unplug and replug your printer into the power source to reset itself. When your printer turns on completely, reconnect it to your computer. Then try scanning again.

Feb 17, 2011 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Our computer maintenance company was able to set up our scanner about three months ago. Over the weekend we have lost that capability. We are receiving an error message: Setting how do I fix scanning...

Click this LINKfor the Scan to SMB setup guide which will walk you through the settings. If it had been working then stopped most likely just one setting has changed; the two things I would look at first is the password for the folder you are scanning to and and IP/Host Name of the computer you are scanning to.

Does your Domain require you to change your password on a regular bases? If so then the password set in the copier to access the folder on the computer may have changed and the new password needs to be set in the copier.

Also the person that setup the scanning originally may have set it to scan to the IP address of the computer you are scanning to but if the computer is setup for a dynamic IP address the IP will change from time to time and then the copier will not be able to find the computer you are scanning to. Change the IP that the copier is set to scan to, to the Host Name of the computer you are scanning to and that will no longer be an issue.

The Scan to SMB setup guide goes over these settings.

You can also call Kyocera's free help desk Monday - Friday 9 am - 6 pm EST at: 1-800-255-6482.

Dec 20, 2010 | Kyocera Km-3060 Mfp Copier Copy Machine...

1 Answer

Problem for HP Color LaserJet 8500 Printer Black line on the left side printed page while making copy on HP. This problem occurs only while loading the page on the top tray HP 8500 printer. No black line...

This is usually caused by something on the scanner glass. Check for dried ink or correction fluid on the scanner glass. We have a short article about solving this type of issue posted here:

I hope this helps, if so please rate our solution.

Corporate Computer

Apr 28, 2010 | HP LaserJet 8500 Color Printer

2 Answers

Toshiba e-Studio 350 - How to Print?

Did u install printer kit? It looks like a mini thumb drive, hooked to usb port?

Mar 07, 2010 | Toshiba e-Studio 350 Copier

1 Answer

Takes 45 minutes for one scan!


You must have been scanning using large DPI settings. Try to use 100 DPI for scanning. Also make sure that you have alot of free memory on your system. Hard drive space also affects the speed of the scanning. If you are using a parallel printer port for your scanning, this will contribute to the slowness of your scanning.

I hope this helps. Have a nice day.

- HotRatchet

Dec 14, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Scanner doesn't work

You need to have the Home center software installed on your computer.The home center software has scanning drivers of the printer.If the printer says scanning,may be the drivers on computer are not taking commands from printer. Kindly mention the name of printer.Kodak has recently launched a new version of software 4.2 . It usually solves the issues relating to scanning and printing from computers.Download the latest version of software from

Sep 26, 2009 | Kodak ESP 5 Printer

3 Answers

I install konica bizhub 350 to my network. scanning is going to SMB and very nice, but when i want to print from my PC, it did not print and also give no error.plz immediate help necessary. envoirment is...

Reinstall print driver to the PC using same ip address and print test print. next the same procedure go to web browser enter the ip address and choose administrator and the password 12345678. all your question will be in that area. scan, printing and network.


Aug 08, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Scanning to a Computer

I googled the code and got a few returns. In a nutshell, either the LAN Cable is not connected or the destination address is wrong.

Jul 31, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides