Question about Culligan Sediment Water Filter

1 Answer

Softner model hi flo 2 water volume about half

Culligan softner model hi flo 2 water volume about half normal

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Culligan Expert
  • 306 Answers

The flow packs are not opening properly. There may a restriction in the lines feeding the flow packs or the springs/ diaphrams may be bad. I suggest replacing both flow packs and making sure all lines feeding flow packs are free of oxidized iron and debris.
RJ

Posted on Jun 30, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My softener is a Culligan Mark 89. Water looks clear but is real salty. I bypassed the system and purged the lines to get rid of the taste.


Call Culligan for service. You have a serious problem as it sounds like your resin bed is not going through the backwash cycle before returning to operate mode.

Normally when your water softener goes through a recharge cycle, a solenoid operates to bypass the system while brine (extremely salty water) is drawn into the resin tank to perform the ion exchange process. This is a timed process. Once it completes then your softener switches into backwash mode where the resin bed is flushed with clear water. Finally at the end of the recharge cycle the softner switches back into normal operation.

This is not something that you can fix yourself. Contact Culligan immediately.

Nov 01, 2014 | Measuring Tools & Sensors

1 Answer

My Culligan water softner is leaking from the coonection where the tank and the control head meet how can i fix this problem?


It depends on how old it is. Older Culligan systems(pre 1999) have separate inlet and outlet on tank and have washers that fit inside the "FEET" that slide onto tank. Newer style systems have center opening tanks with o-rings that seat on tank. You need to see what model it is. Bypass the system, run through a manual regeneration to relieve pressure, then you can change the washer or o-ring. They are only available at Culligan.
RJ

Mar 24, 2011 | Culligan 34" Whole House Water Filter...

1 Answer

Culligan mark 5 softner is not softning


The filters do need to be changed every year with the exception of the reverse omosis filter which needs to be changed every 5 years or sooner if the filter is used more than normal. Also if the brine is 5 years of age change the pellets in that tank as well

Jan 16, 2011 | Culligan Sediment Water Filter Heavy Duty

1 Answer

My Culligan MC450S water softner has a blank flashing display. Water seems to be constantly running through the softner and pressing any display panel buttons has no effect.


This system should be under warranty still. If it is running to drain constantly bypass the system and call Culligan for service. Unplug it for 2 minutes and it may reset.
RJ

Jan 08, 2011 | Culligan Sales #SY-750S Under Sink Water...

1 Answer

I have culligan house water softner. after i changed my hot water heater my softner stopped working. I dont have a manual to check. any suggestions?


Unless the softener was bypassed when the water heater went in, installing a water heater has no bearing on the softener working or not. Is it unplugged?
RJ

Aug 27, 2010 | Culligan 34" Whole House Water Filter...

1 Answer

We have a summer cabin up in Minnesota on a lake on the Measbi Iron Range and the iron content of our water as it comes out of the tap is 240 times greater than the EPA allowable maximum. If we install a...


Hi,
Water softners will remove approx. 90% of the iron from the water...if this is acceptable then you are okay with the Culligan...if not then you will also have to install an iron removal system in addition to the softner.
Also check around with your local plumbers, as many will install a water softner at a gereatly reduced cost from what the franchises will charge you...and they have just as good a systems and often do a much better installation job.

heatman101

Aug 13, 2010 | Plumbing

1 Answer

My culligan water softner just keeps running .


It is most likely running to drain. This is an indication that the seal pack is seized up, generally from a bent piston. You need to by-pass the softener and call Culligan for service. If you are handy there is a retro-fit kit available from Culligan to remedy this problem. It takes about 1/2 hr to install.
RJ

Jan 31, 2010 | Culligan Under Sink Water Filter

2 Answers

My culligan mark 89 water softner the salt bin never is used up anymore. its been 2 months now and its still full but i hear it everynight turn on


Try cleaning the filter screen under the metal cover plate. Also check your water supply pressure. Some softeners won't run properly on low pressure.c8a54da.jpg

Sep 03, 2009 | Culligan Sediment Water Filter Heavy Duty

1 Answer

MISSED RINSE on culligan softner


the unit number one needs to be reprogrammed by a professional only it is tricky and ck the motor in the unit this controls the valves turning and water direction control.

Apr 29, 2009 | Culligan Sediment Water Filter

Not finding what you are looking for?
Culligan Sediment Water Filter Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Culligan Measuring Tools & Sensors Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14793 Answers

ray gallant

Level 3 Expert

42923 Answers

Are you a Culligan Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...