Question about Creative Labs I-Trigue L3500 Computer Speakers

1 Answer

Erratic volume the volume controller goes full blast erratically. if i touch the controller or change volume, it goes full blast then to its selected volume. if i bump the controller, it goes full blast. nothing giggles iniside, nothing is loose, its just super touchy. never was like this before.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,185 Answers

Either the potentiometer which sits behind the user knob has got a broken track or it is full of debris

You can buy a tin of Servisol switch cleaner (or similar, make sure it has a lubricant in it and that propellant does not harm plastics) take off the knob and give it a good squirt where the spindle of the potentiometer enters the cabinet

Give the spindle a few full rotations and another dose of cleaner , then give it a try

It is best if you take a cover off and apply the cleaner direct to the potentiometer

Posted on Jul 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Yamaha RX-V1000 volume control erratic, remote doesn't work. All was well then the volume control knob became erratic (volume would change erratically as knob was turned in either direction, remain...


sounds like you need to take it in to have it looked at. no simple fix unless you are an appliance technician. hard to walk a beginner through. i suggest calling an stereo repair guy.

Fix Ya
FixYa Support

Please accept solution and rate 4 thumbs up! Thanks for your feedback!

Aug 21, 2011 | Yamaha RX-V1000 Receiver

1 Answer

Volume control wheel on my Acer Aspire 7720 erratic.


I also fixed by installing the Synaptics touchpad driver.

Sep 21, 2009 | Acer Computers & Internet

2 Answers

Cursor on my keypad jumps around


If your cursor moves erratically on the screen (for example, if it jumps around the screen, moves at varying speeds, or selects items on its own), perform the following steps:

1. Clean the surface of the touchpad with a dry, soft cloth to remove grease, sweat, moisture, or other liquids.

2. Adjust the sensitivity of the touch pad:.

a. Click the Start button and click Control Panel.

b. Click Printers and Other Hardware.

c. Click Mouse.

d. When the Mouse Properties window appears, click the Pointer Options tab.

e. Under Select a pointer speed:, click to move the slider bar closer to Slow.

f. Click OK.

g. Check to see if the touch pad still behaves erratically.

3. If the touchpad still caused the cursor to behave erratically, attach an external mouse to your computer and restart your computer. Use the external mouse to see if your cursor still moves erratically.

4. After connecting an external mouse, uninstall the touchpad driver from the Device manager listed under the "mice and other pointing devices" category and restart the Computer.

5. Download the Touchpad driver compatible to the Operating System installed on the Computer from the manufacturer's site and install it after restarting the Computer.


Good luck!!!!!!!!!!

Sep 18, 2009 | Dell Inspiron 6000 Notebook

1 Answer

Erratic audio volume


Reinstall the driver

http://drivers-download-center.org/tag/erratic-audio-volume-driver

if the problem persists, check hardware

Jun 03, 2009 | Dell Dimension 9200 PC Desktop

1 Answer

CA-EX70R The receiver will not always change from FM to AM and vice versa, and the volume control is very erratic Regards Alastair Will


I cleaned the PCB with the volume control and checked the volume control but as I could not get any specifications  info on the control reassembled it and it works. I suspect I have only bought time  Alastair

May 19, 2009 | JVC Audio Players & Recorders

1 Answer

Volume control on in-dash unit not working properly


Sony CDX-GT300 volume control stopped working. Radio is either on full-blast, or you have to turn it off. Any solutions? Thanks!

Aug 03, 2008 | Car Audio & Video

2 Answers

Car radio volume control knob is erratic


When I turn on my radio, the volume is on and o.k. but when I try to turn it higher or lower the volume is lost completely. Any comments?

Jul 06, 2008 | 2001 Pontiac Aztek

2 Answers

Car Stereo Volume Goes Up and Down Erratically


prolly buy a truck and a amp from this century

Oct 05, 2007 | Car Audio & Video

3 Answers

Erratic volume on Technics SU-X911 amplifier (Class A)


its the ic that controls the + and - voltage and there are capacitors that have leaked all the caps on that board need changing could be expensive and time consuming but its the age of it . if i was going to do that job £200 plus\

Aug 24, 2007 | Technics SA-DX940

Not finding what you are looking for?
Creative Labs I-Trigue L3500 Computer Speakers Logo

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...