Question about Zanussi 24 in. DA6141 Built-in Dishwasher

1 Answer

Zanussi aquasave dw24

The power light comes on but dw does not start on any setting. Has worked fine for years. Any suggestions as to what this could be ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 75 Answers
Re: zanussi aquasave dw24

Hi there sounds like your door latch switch could be at fault.

hope this helps

Posted on Dec 09, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

DW (top drawer) will not start.Green light comes on when pushed to start but after 1-2 minutes, DW starts beeping and start button light turns red.

Turn the mains power off and back on after a little delay. If no change, some sensor in the drawer is faulty - most likely the drawer close sensor as it is telling the controller the drawer is not closed.

Mar 23, 2013 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

There is smelly water left in the Salt container. How can I solve this and drain it away? What is the cause? The model of dishwasher is Zanussi, Aquasave, DW24.

I was very disappointed to find out that you did not actually offer me a solution to this (surely very simple) problem. For this reason I certainly would not take out a plan with a company like yours. You have offered me no advice whatsoever although you promised assistance.
You are obviously a company that cannot be relied on.

Nov 21, 2009 | Zanussi 24 in. DA6141 Built-in Dishwasher

1 Answer

Where can I get a manual for my zanussi aquasave dw24

Your model did not appear on my search. Here's a link to Zanussi DWs, check your model number again and check here:

Best regards, --W/D--

Aug 18, 2009 | Dishwashers

1 Answer

Zanussi DE 6554 Dishwasher

Wash the dishes by hand and view them again 1 hour later. If the dishes are still cloudy it's too late you have been running in hard water for years and etched the dishes. Salt only regenerates the Xeolite beads inside the DW. They collect minerals until they can no longer hold more, then the DW washes the minerals off the beads with the salt. Check if the DW is set correctly to the appropriate water hardness of your town. READ THE OWNERS MANUAL. PS> 1. You can't use regular salt. 2. Is the salt dry? Salt must be added into water so it creates solution (brine).

May 05, 2008 | Dishwashers

2 Answers

ZDT5052 flashes quickwash light

Tarvi...I don't know what the problem is...hard to diagnose these things. If the unit is working correctly, I suggest that you simply cut the power for a few minutes and then restart it. That may clear our a trouble code.

Dec 06, 2007 | Zanussi 18 in. ZDT5052 Slim-Line Built-in...

1 Answer

Dishwasher zanussi aquapulse

this sounds lie a door interlock, in most models this is a micro switch where the handle is inside the top of the door casing, i would start there, based on the info that you have given

Sep 19, 2007 | Zanussi 24 in. DE6965 Built-in Dishwasher

3 Answers

Won't turn on

The door switch is definitely not the problem if the indicator lights are not coming on. These lights are supposed to come on when the door is open.
The problem is 1 of 3 things:
1) No power to outlet that DW is plugged into;
2) Bad connection where power cord is connected to dishwasher (see very bottom front, under kick panel)
3) Some problem internal to the DW (eg., bad switch, shorted wire, etc., )
Our SHX46A is definitely having problem 3, but Bosch's manual gives zero help. So, off to find more info online or, lastly, to call Bosch repair person. Sigh.

Jun 13, 2007 | Bosch 24 in. SHX46A02 / SHX46A06 Built-in...

2 Answers

Zanussi built in aquasave zt 685

I think I had a similar problem to this. It seems like it was starting a cycle but then it just stalled and made a buzzing noise and it did not drain properly. I opened the bottom of the dishwasher where the draining pump was located. take off the plastic cover and I found bits of broken plates were jamming the fins on the pump... Try this and see how it goes.. Hope it was of some asistance.

Mar 14, 2007 | Zanussi ZT485 Built-in Dishwasher

Not finding what you are looking for?
Zanussi 24 in. DA6141 Built-in Dishwasher Logo

Related Topics:

762 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers


Level 3 Expert

1751 Answers

Are you a Zanussi Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides