Question about GE Profile JGS968 Gas Kitchen Range

1 Answer

How do i remove the control panel? it does not work only displays time.

How do i remove the GE Profile gas range contol panel and replace it?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Take out the 4 burner knobs, just pull them straight out. Then, you'll see those round holders for the burner knobs, about 1 1/2 inches in diameter. They actually screw out, lefty-loosey, righty-tighty. Those 4 things are holding the control panel onto the oven, aka the keypanel. When you unscrew them, you should be able to pop the keypanel right off, depending on how strong the seal is (ours was worn and weak - 8ish years old I think). The problem you described sounds like the ribbon cable is unplugged, or has some gunk on it. A guy on Youtube says you can get the gunk off with a pencil eraser. Then carefully put the ribbon cable back into the slot on the back of the key panel, and put it back on the oven by lining it up and screwing in those black round holders for the burner knobs. You probably need to fix the seal on the keypanel so liquid/food doesn't spill in there; that's our next project (we don't use that range often.) Also, turn off the electricity and gas before you do this. (We flipped a switch at the circuit breaker to turn off electricity, but we didn't turn off the gas.) I'm not an expert, so please read safety tips in the manual before trying this. Good luck!

Posted on Mar 19, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ngafm
  • 166 Answers

SOURCE: GE Profile gas range

hello dreeden5
Ngafm at your service,


You have a GE Profile oven range. I and you just cleaned it and the pilot light on all four burners continues to click on and off.

It sounds like the gas line or the gas valve, have some debris in them!
They need to be evacuated by an experienced tech.
This time you need service.

Bless You ngafm
Please give me a good rating at this sight before you leave!
Thank You

Posted on Sep 11, 2008

  • 114 Answers

SOURCE: GE model JKP13GOP2BG control panel faulty ( F1 code)

Often times when someone makes an attempt to "repair" a control, it does not hold up. Replace the entire control. Don't waste your time. You will also get a year warranty on a replacement control.

Posted on Dec 13, 2008

MNTECH
  • 1543 Answers

SOURCE: Converting a GE Profile Gas Range from LP to natural gas

GE ships gas ranges set for natural gas, with the LP orifices included, usually on a metal tab held with one screw right near the regulator (where the gas connects to the range). If the range was converted to LP, the person who did the conversion was suppose to put the natural gas orifices back in that holder. If they are missing, comment back on the exact model number and I can look up the part number(s) for you.

Posted on Jan 06, 2009

MNTECH
  • 1543 Answers

SOURCE: GE gas range igniter continues to spark, won't shut off.

Often times, just leaving the range unplugged for a time will solve the problem, which is most often caused by water or a cleaning agent getting into an igniter switch behind a burner knob. After the switch drys out it usually starts working again. In the mean time, you can still use the burners by lighting them manually with one of those long lighters, but you will not be able to use the oven or broiler without electricity. If the range continues to spark after being left unplugged for more than a day or two, you will have to determine which switch behind the burner knobs is causing the problem. Please don't bother rating, as anything but a Fix-Ya will lower my score. Thanks.

Posted on Feb 18, 2009

  • 1 Answer

SOURCE: Panel of GE profile gas range says 'LOC ON', how

This is the controlled lock out mechanism so that your children cannot play wilth the controls. Press "0" and "9" at the same time and hold them until it says "LOC OFF."

Posted on May 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Profile Gas Range control panel not working


If you are getting no display or any functions at all from the display you will need to replace it. Here is the control display to order.

All parts come with a 365 day, any part, any reason return policy.

Feb 17, 2013 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Panel Clock flickered then went out. Everything died. Power to unit OK. Is this the contol Panel?


You can remove the rear panel and look for a loose wire on the control panel. If you don't see a loose wire, you will need to replace the panel. What is the model number that is displayed on the range?

Jan 25, 2011 | GE Spectra JBP78 Electric Kitchen Range

1 Answer

GE Profile Convection oven - 3 buttons on the control panel stopped working - can I find schematics anywhere oneline?


No schematics on line.
Take the key panel ribbon out of the connection to the control board and clean the end off with a pencil eraser. (some contacts are on one side, some on the other) Reistall and test. That takes care of the problem about 50 % of the time. If you still have the problem, replace the key panel.

Jul 25, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE SPECTRA GAS RANGE XL 44 BEEPS AND DISPLAY F7


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

May 10, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Error code F7 and controls will not work


Hi there,

I think it have  F7 error not just F...
F7 error code occures due to
A = Function pad button stuck or 
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Replace the ERC there are ten screws 3 on each side and 4 on the control leave the hex screws alone all you need is a phillip screwdriver.
REMEMBER TO SHUT OFF THE POWER FIRST lift and fold out the control panel remove the ribbon cable and remove the four screws that hold the control board . replace control panel in reverse order.
Good Luck!!
Thanks

May 02, 2009 | GE Profile 30" Self-Cleaning Freestanding...

2 Answers

Panel of GE profile gas range says 'LOC ON', how do I remove or reset?


This is the controlled lock out mechanism so that your children cannot play wilth the controls. Press "0" and "9" at the same time and hold them until it says "LOC OFF."

Mar 21, 2009 | GE Profile 30" Slide-In Gas Range -...

1 Answer

Display shows error code "F1"


F1 Failed Thermistor Control Replace Electronic Range Control (ERC)
Good Luck and Please Rate Fixya!

Jan 06, 2009 | GE Profile Spectra JGBP79 Gas Kitchen...

1 Answer

Buttons on Control Panel not working for my GE Profile Gas Range


Anyone has any information as to how to fix my describe problem with GE Profile Gas Range I have.

Thanks

Mar 14, 2008 | GE Profile Spectra JGBP79 Gas Kitchen...

Not finding what you are looking for?
GE Profile JGS968 Gas Kitchen Range Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

172 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...