Question about Fine Digital FineDrive 400 GPS Receiver

5 Answers

Fatal Error Message


Posted by on

5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Fatal Error Message

I have this problems FATAL ERROR, i repair it with the original memory card i have save on my computer.I paste it over the faulty memory cards and my gps is o.k..if you want the original memory cards tell me.

Posted on Apr 18, 2009

Re: Fatal Error Message

The memory card might have been dislodged. Remove memory card, turn on unit, perform a destination function [city,street house no.] without the memory card. The unit won't be able to calculate destination, therefore unplug it. Wait 3 minutes, insert memory card and turn on unit, then perform destination functions. If it works, also do the touch calibration of the unit.

Posted on Oct 21, 2008

Re: Fatal Error Message

Link no respond

Posted on Oct 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Fatal Error Message

My finedrive 400 is not turn on

Posted on Jan 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 107 Answers
Re: Fatal Error Message

I have an older one of these with the AV connections. once in a while it does not see GPS signals. If I exit navigation and from the main menu select setup, I can reset the GPS and then go back into navigation, this seems to cure the issue but it may return. I think the root cause is a low memory battery in the unit.

Posted on Jan 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My s50 3d has come up with the following fatal application error program gwes.exe exception 0x0000005 address 00023174

usually this error will be generated if the SD card pops out accidently, even replacing it will not clear the error until it is turned off and restarted

Please rate my help++++Thanks for using FIXYA

May 09, 2010 | GPS Devices

1 Answer

Navigon 2100 mn6.exe fatal error message....going through update with card reader through navigon site didn't work...asme message. machine works. it seems to be card. how do I fix this or get a new...

I got mine back up and working by doing the following:
1st Icopied the files on the SD Card to my pc (for backup)
2nd I deleted all the files on the SD Card
3rd I went to the following link

and download the update for Navigon 2100 and installed it.

Tested it and it no longer gives me the fatal error.

Jan 07, 2010 | GPS Devices

1 Answer

Fatal Error Application comes on when turning on the GPS

The problem i,m having is All the routes i have taken have Now a Permanent Orange Heavy Line and i can not identify any Roads on my Navigation 4000

Feb 03, 2009 | GPS Devices

1 Answer

Fatal error

This is a common issue, probably corrupt firmware in your unit and/or the sd card.

One solution is to visit C&C wireless and pay over $100 for a map update or even send them your unit for even more $. see

The other solution was to send it to Fine Digital but they closed their doors in the US so they no longer support us customers. Because of this I made a DVD with map data I purchased from them before they closed and I added much better instructions; this DVD updates the firmware in the unit and loads the last map data issued to the SD card. you would need a PC with a DVD drive and SD card reader to use it. you can find these DVDs on ebay for $18 which basically covers my costs only.

Jan 08, 2009 | Fine Digital FineDrive 400 GPS Receiver

1 Answer

IQue 3600 Fatal Alert

You'll have to do a hard reset. Push the reset button, then hold the power button until the Palm Power appear and then release the power button. Next it will ask if you want to erase the data. I hate to said this but select yes. No will not work. Then after the inital set up run a HotSync.

Jun 18, 2008 | Garmin iQue 3600 GPS Receiver

2 Answers

Pioneer GPS - AVIC-S1

Main screen ---Settings ----Keep follow the 1st page, you will see the restored function as Restore Factory Settings.

Apr 13, 2008 | Pioneer AVIC-S1 GPS Receiver

2 Answers

Mio digi walker 220

application MioUtility,exe has performed an illegal operation and will be shut down. if the problem persists, contact the program vendor


Mar 20, 2008 | GPS Devices

Not finding what you are looking for?
Fine Digital FineDrive 400 GPS Receiver Logo

569 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fine Digital GPS Devices Experts


Level 3 Expert

7983 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

66587 Answers

Are you a Fine Digital GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides