Question about Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

3 Answers

Kenmore 665.17539. fills but does not wash. makes

Kenmore 665.17539. fills but does not wash. makes humming noise. checked pump but it is clear. what can i do

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Kenmore 665
My dishes on the top rack are no longer getting clean. I don't think any water is going to the top. The dishes on the bottom get clean but have a soap residue on them.

Posted on Jul 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 235 Answers

Remove the front botton panel and manually turn the fan blade. This works sometimes.

Posted on Jul 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Quiet Guard is not quiet any more. It makes a very loud noise when wash cycle starts.

Posted on Jul 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine will fill but it will not agitate or spin. It makes a looud humming noise like it is trying to work. It is a Kenmore 70 series Model # 20702


Possible that the motor is faulty or is stuck and makes the noise. it will be good to remove and check the motor after disconnecting the power cord. Also it is possible that the CAPACITOR is faulty and so the motor HUMS. Please check this out.
Please check if the belt or the drive is struck and so the motor is jammed.

Mar 28, 2011 | Kenmore Washing Machines

1 Answer

The washer stopped all of the sudden. It was full of water, but even when I unplugged the washer and recycled the machine, it would not fill up. It makes a humming noise when I try to start the machine,...


If it fills and drains then I would suspect the motor coupler is bad, if it's a direct-drive washing machine. Most of them are, kenmore 80 or 90 series.

Oct 10, 2010 | Kenmore Washing Machines

1 Answer

Kenmore Elite (Calypso) Top loader Will start and fill up w/ water, and wash for a while. During the washing process it makes a humming noise and then the display gives a "ob" reading. I have replaced the...


The OB indicates and out of balance condition has been detected by the motor control.
One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 18, 2009 | Kenmore 23822 Top Load Washer

1 Answer

It fills & dumps the water with no problem BUT it will not wash the dishes it just makes a humming noise.


OK, i would test the motor to make sure that it is working properly. this is a two speed motor and, if the windings are bad or separating, it will not be able to switch speeds. if the motor checks out ok, this will confirm control failure. replace timer or control board in this case.

May 29, 2009 | Kenmore Dishwashers

1 Answer

Kenmore washing machine fills with water then stops


turn the motor to see if it moves it sound like the motor

May 02, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore front-load washer stops at rinse cycle


When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

Mar 03, 2009 | Kenmore 43142 Front Load Washer

1 Answer

Kenmore Washer


if whines when filling not pump but fill valve try adj faucet toward off slowly this may reduce noise also be sure all screens are clear ..replacement not necessary if you don't mind noise ..now if noise in pump out remove hoses to pump on bottom remove 2 clips holding pump on remove pump and clean

Jul 31, 2008 | Washing Machines

1 Answer

Kenmore model# 110.26892690


Sounds like the fill valve screens or fill hose screens need cleaning or replacing.Also if you are using burst resist hoses braided steel type some have check valves that if are defective may cause a no fill.

Oct 09, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher Logo

1,888 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...