How do I report faulty disc?

Well this is not a router question I will still answer it for you:

Although neither President Obama nor Vice President Joe Biden attended Gen. Greene's funeral, a high-ranking Obama administration official was present. As the military publication Stars and Stripes noted in its reporting of the funeral, U.S. Secretary of Defense Chuck Hagel attended the ceremony and met with Greene's family:

Its a problem with scaner unit. Reports are being printed out, and do not pass trough scaner, because of thath report is Ok.

If the fax is still under warranty, go to warranty provider service.

Next time dont buy "kids toy" for fax machine. Try laser Canon Fax L140.

Hello. Call direct tv and report this glitch. they will send out a technician to replace your DVR. Joe

please rate my answer as very helpful. thanks.

check the printhead.... print a print quality page from the settings button select print reports then print that page. there is a printhead health area as well as color blocks if there is streaks in the black yellow blocks or says poor the black/yellow printhead needs to be replaced. if it says good call hp for further troubleshooting and possible replacement under warranty

Bulk disc that comes in cylinder case are some time faulty and loses quality because they packed on each other. The lens of the disc are sensitive so if disc is scratch or dirty will get error message "no read". Turn the unit off then unplug ac power cord for more than two minutes then reconnect and try disc again, if issue still exist purchase disc that comes in individual case.

Have you tried downloading the latest version of the drivers & software for your printer?
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=7895&pq-locale=en_US

Give that a shot & Good Luck!

By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming and outgoing faxes
• If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
  Thanks, Joe
  

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

hi joe, u will have 2 get the diagram from a book stores for ur model..thats the only way out,..or the manufacturer can help u with the R342..

I advise you to send it back to sony if it is under warranty and report a faulty blu ray drive.

You may try a different style DVD disc. Are you using (+), (-), or (RW) the DVD makes a difference. http://pdf.crse.com/manuals/2636511113.pdf Here is the manual for your product. Check pages 9 and 10. These pages tell you the type of DVD disc to use, and what speed they can be used. Let me know what happens. Good Luck, Tim