Question about Jensen JHT525 System
I currently have a JHT525 surround system, but I don't know if I need a receiver for it. Also when I connect the speakers to the back of the subwoofer, no sound comes out except from the sub. If anyone could direct me to a manual or let me know of the correct way to connect the system, that would be great.
Thanks a lot,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
plug your low input into the subwoofer output of your reciever.that should get the sub working then you have to run speaker wire from your speaker outputs on your reciever into your sub in the top row of inputs then the outputs on the back of sub(the bottom row of speaker hookups go out to your speakers....my email is firstname.lastname@example.org if you still cant get it i can talk you through it on there or ill give you my instant messenger name is you still have problems good luck,b
Posted on Feb 02, 2008
SOURCE: jensen jht525
See if any electrolytic filter capacitors are blown (bulged at the top), badly soldered or if they have broken contact pins (legs), a loud hum in the audio suggests there is a non rectified (AC) voltage present which could be caused by a bad or badly connected filter capacitor.
There may as well be other reasons for the hum (a bad earth connection,a loosely plugged or badly soldered audio or internal connector, bad rectifier bridge or diodes, as the case may be, bad solder joints on any component, possibly other components that are faulty).
I just suggested some of more common possibilities.
Hope you can fix it.
Posted on Sep 23, 2009
Disconnect everything, and turn it on. If it hums, it needs repair. Then try hooking up one cable at a time. If a connection hums, try another cable. If it hums no matter where you plug it in, try a 2-prong power plug adapter, or a ground-lift plug, as it's called. If nothing works, it may need a repair in its power supply. It would still turn on, but buzz no matter what you connect.
Posted on Dec 13, 2009
Tips for a great answer:
Aug 22, 2010 | Jensen JHT525 System
Dec 13, 2009 | Jensen Audio Players & Recorders
Sep 23, 2009 | Audio Players & Recorders
Aug 08, 2009 | Jensen JHT525 System
May 31, 2009 | Jensen JHT525 System
Apr 05, 2007 | Jensen JHT525 System
Jan 17, 2011 | Jensen JHT525 System
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: