Question about Projection Televisions

Open Question

Phillips magnavox 8p6034 c101

I have a 64" projection tv made by phillips magnavox and my picture seems to be getting darker and darker, also the white and lighter color places are getting a sort of haze arround them. i was woundering if you could lead me through how to fix it

Posted by on

4 Suggested Answers

  • 3 Answers

SOURCE: Problems with my Phillips Rear Projection TV!!

have the coolant (glycol) in the CRT's....not as expensive as buying a new set...and sounds like it should be good as new if thats the only problem you have with it.

Posted on Feb 17, 2008

  • 164 Answers

SOURCE: BIG TROUBLE with my 52" Phillips Magnavox Rear Projection Tv, HELP!!

It sounds like the 3 "GUNS" are not aligned.
One the controls at the bottom, left hand side You will see an arrow pointing to the first 2 on the left.
That will allow you to scroll down the list of options until you see....CONVERGANCE!
make the red gun center by using the up/down arrows on right. Then add the next 2 until you see a white X or cross.
Thats it!

Posted on Feb 18, 2009

  • 150 Answers

SOURCE: no picture

Hi, common problem, have a tech replace IC7412, gl, video-tek

Posted on Jul 03, 2009

  • 1126 Answers

SOURCE: My 2001 60inch Philips Magnavox

It is the coolant that has allergy growing in the blue and green guns, it will not grow in the red gun. If you have the coolant change it will look just like a new TV, right now the video is being block, and kind of on the greenish looking. It should run about two to have the coolant changed in the guns (CRTs).

Posted on Jan 14, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Problem with the Philips Magnavox 9P6034C 60 in. Rear Projection Television, had TV for 16 years. Picture gradually got darker and less clairity

the projection tubes do wear out over time and there is no fix but to replace them. you might first check to make sure the lenses and mirror are clean, do not use compressed air to clean as you may force dust between the lenses. if the picture is darker at the edges or a different hue then the coolant is likely contaminated and needs changed

Dec 15, 2010 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

I have a Magnavox 50ML8105D/17 the picture is getting darker

You need a new bulb replacement. The owner manual will even instruct you how to change the bulb.

Oct 24, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer


you need the ssm panel. You can get a replacement panel for your model at the following link.Which is the correct board for your model it controls color, convergence and etc.

Apr 21, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Picture has a red "haze"

the color in my tv is a little faded when theres dark scenes on cant really see picture. Red and Blue really fade into picture

Feb 21, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Picture getting darker

first thing i would look at is it is probabily dust on the lences and miror, you need to take the screws out all the way arount the screen from the back, then lean the screen out tward you from the front, do this while the tv is on, you will be able to see the dust alot better, take a soft cloth and glass cleaner and clean little miror, and lences

Jan 07, 2009 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Screen is getting darker

The most likely cause is the blue and green tubes need to have the cooling fluid changed. After many years the blue and green get clouded with algae. The red tube won't have the problem due to the red spectrum kills the algae before it has time to grow. 

The way to replace the fluid for is to completely remove each CRT from the set, remove the drain plug, drain the fluid out the tube, disassemble the lens, give it a good cleaning; then reassemble; add fluid; and reinstall in set. If you check with the site they are working on a kit that includes the fluid and photo instruction guide. 

Dec 14, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Color fading in picture

you need to replace the coolant in thr CRTs( picture tubes) Vert common problem in phillips. You can get the enitre repair kit at the following link which has the coolant and instruction CD for phillips coolanrt change. Heres the link its under the repair kit section.

Jul 21, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Phillips Magnavox 60 inch tv

not showing a picture are making a sound.

Jul 05, 2008 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57192 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides