Question about Dyson DC07 Bagless Upright Cyclonic Vacuum
My Dyson vacuum works fine for cleaning the rug but the hose doesnt get any suction at all. I removed the hose and all the parts around it that I could and dont see any clogs or broken pieces. I lost my manual so I dont know if this is addressed, or if there is a switch Im not flipping. Gave it a thorough look but found nothing.
Just resolved the same problem...couldn't find a blockage anywhere, but pulled handle out of hose and extended hose as far as possible upward. Aha! There was blockage in the hose at the very bottom where the flexible hose meets the rigid part.. There is a lever which releases the entry to the bottom of the hose. A pencil, lots of coins, a crumpled receipt and general dirt were stuck. Easy to clean and now it works like new again.
Posted on Aug 09, 2009
Make sure little hose on bottom is not split and you have roller bar switched on, dc07 after a few years pick up very poorly, i am a vacuum repair and sales shop
Posted on Dec 04, 2008
Hi, it's Jim from Crucial Vacuum.
Hoses can be easily blocked depending on the type of debris your vacuum is picking up. Be sure to fully extend the hose to see if any object may be stuck towards the bottom, perhaps a coin, marble or even a rock. Another thing to look for is along the hose make sure there aren't any rips or splits. All of these factors could interfere with the hoses suction.
Should you need a replacement hose you can purchase direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
For your convenience here is a link to our site where you can purchase a replacement hose for your DC07:
I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.
Crucial Vacuum Customer Care
Posted on Nov 03, 2014
This worked for me my dyson 41animal was pretty new
Posted on May 24, 2012
My vacuum seems to have two motors... once for the beater and one for suction. The one for suction is doing absolutely nothing. When I turn off the beater motor or stand the vacuum upright, the machine is completely off. HELP!
Posted on Aug 22, 2010
Tips for a great answer:
Aug 20, 2014 | Dyson DC17 Animal Bagless Upright Cyclonic...
Oct 05, 2013 | Dyson DC07 Bagless Upright Cyclonic Vacuum
Jul 26, 2011 | Dyson DC07 Bagless Upright Cyclonic Vacuum
Oct 31, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum
Jan 30, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...
Aug 19, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...
12,919 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: