Question about Televison & Video

1 Answer

Conversion is messed up

During the storm last nite our power flickerd,and the t.v. went off.When turned back on,the conversion is messed up.When I try to fix it,it will not stay where I set it. I have a R.C.A. 52. in.
model #HD52W59...
Any thoughts on what I can do to fix whatever the prob. may be? thank you...

Posted by on

  • fayfire Jun 30, 2009

    I have full control of the conversion menu,I can move the cross up,down,left right.It just does nothing for the pic.
    Auto conversion goes all the way through the green.but only 3 red will come up.

  • fayfire Jun 30, 2009

    Awsome thanx

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

Let me see if I can find the proceedure to go into service mode. So you can adjust the convergence.

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv went out last night during a storm. TV was only thing effected. not tv will not turn back on. red led light blinks 14 times when try to turn on


hi, normally that because the power supply unit cannot supply the required voltages for various components on the TV , from back-light inverter to logic board etc...

Regards
Rob

www.gewizrepairs.co.uk

Jul 15, 2015 | Panasonic TC-P50G15 50 in. Plasma HDTV

1 Answer

Hitachi 46w500 went off tonight during storms, low voltage, wont turn back on


There might be a failure on the power supply or horizontal section of the TV even if you see some light inside the TV. Some of the voltages could be missing and that is why the TV fails to power up.
If you know how to use a multimeter, you could check all the fuses from your power supply.
Unplug your TV from the main AC line if you intend to do it yourself.
You will know how much you can do or it might safer to contact a tech.
Let me know if you need further assistance

Jun 04, 2008 | Hitachi 46W500 46 in. TV/DVD Combo

1 Answer

AKAI Rear Projection TV Model AKAIPT46DL10 Will not turn on. The power went out during this last storm and when it came back on the TV would not power on.


When you say that the tv would not power on do you mean that even the LED at the front does not come on? Please provide this info so that I can help you with your problem.

Sai.

Aug 29, 2011 | Televison & Video

1 Answer

Had a lightning storm,now brand new aircon wont restart,remote is ok


The electrical storm may have caused a power surge and burned out the circuit board. Especially, if the power went out briefly and then came right back on. Most manufacturers recommend turning the unit OFF during a power outage/electrical storm.

Hope this helps you.

Mar 25, 2011 | Heating & Cooling

2 Answers

After a huge lightening storm, my tv seems to be frozen, went on this morning but will not chang channels or even turn off. I can't find a reset button Help!


Unplug the set and any peripherals that are plugged into it. Then push in the power button and hold for at least 60 seconds. This should reset it to recover from the surge effects caused by the lightning.

Sep 05, 2010 | Polaroid 1911-TLXB 19 in. LCD TV

1 Answer

Thankyou for your help ive took the back right off and theres 3 lamps red green and white, i bought this samsung 42in rear projection 2nd hand it worked absolutely fine the first nite i got it then...


Cheryl at a guess i would say that was why it was sold. It has an intermittant control board fault.

Now these often extend beyond just the one board ( there are 3) Opening the TV up is a risk to you as not only does it have scatter radiation type X but it is the HIGH TENSION area where severe burns and electrocution is the risk. Call a professional to fix it. We have people on here all the time trying to do this on the cheap, not many suceed as often they think that just swapping the boards out will fix it. Rare! Most times it ends up costing 3 times as much because they dont have the knowledge, essential tools or the skill to tune it properley and they end up fritzing the board again or blowing the expensive lamp.

Thanks for using FIXYA Please rate oure help to keep the FREE service online++++

Sep 18, 2009 | Televison & Video

1 Answer

Tv dead after storm


you could open it and look to see if the fuse is blown

Sep 22, 2007 | Philips 42PF9946 42 in. EDTV-Ready Plasma...

2 Answers

JVC AV-48WP34


If you are in the service mode, pressing the muting button saves the convergence values to memory.

Jun 08, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...