Question about Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

Standard horizon 155c not acquiring signal

Standard horizon 155c gps/chartplotter not acquiring signal connection seems good

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

If the signal is good statement seems to imply that it is working, perhaps this is my misinterpretation of what you mean by this.
Signal refers to the abi;ity to connect to satellites
4 are requied for triangulation.
If the unit is fully charged and not connecting , then it is quite possible that the unit has a damaged SIIRF chip or whatever chip was used in your model to acquire satellite connection. The cost of repair is costly, it means total replacement of the M/Board.
Never start car with the unit connected into DC car power, spikes will damage the chip

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does My 170c is not receive signal. It shows "acquiring" all the time


It is not "linking" the GPS signal to your GPS receiver. There may be a "dead spot" you are in or the unit itself has a malfunctioning RF unit within the GPS receiver.You cannot be under a bridge or other obstruction with a GPS unit for signal to reach it.

Aug 10, 2014 | Standard Horizon GPS

6 Answers

Garmin GPS GSMAP 182C Chartplotter will not boot up


If the unit doesn't go further from the reading card. this may indicate that theres a problem in the memory card.

Not being able to a get a signal lock on satellites would indicate a problem either in the software something is wrong or not geting loaded correctly (the memory card) Or a hardware problem.

You may have to take it in for service if you are unable to check the memory card or replace it.

Jun 27, 2008 | Garmin eTrex GPS Receiver

1 Answer

Hello, Can you tell me what make of GPS will work with the Icom m-504. I tried using the Garmin 76csx with the NEMA in/Nema out function set, but it will not communicate to the Icom. I would appreciate...


Hi!

We had the same problem with our Uniden Oceanus failing to communicate with our GPS. What the problem was, was that our VHF didn't recognize the NMEA sentences transmitted from our "ancient" GPS. We ended up buying a Standard Horizon cp180 chartplotter. PRESTO! Our DSC capability materialized.

Your 76CSx is newer than our Magellan was, so before you take on the task of a $400 chartplotter purchase, just make sure your BAUD rate is set to 4800. This adjustment alone could make your GPS work with your ICOM.

Hope this is helpful.

Jan 23, 2011 | Icom IC M504 Black Submersible PLUS Marine...

1 Answer

Can it take ais?


Hello,
A Standard-Horizon CP180 Chartplotter can recieve information from an external AIS device with a NMEA data wire connection. The cable from the NMEA output of the AIS would be connected to "Port 1" (Page 18 of the CP180 user manual) on the CP180 and then the CP180 menu settings configured to show AIS targets, data, etc. (Page 21 on the CP180 user manual)

Nov 19, 2010 | Standard Horizon Cp180 Chartplotter

1 Answer

I need an operating manual for a Standard Horizon CP155c chartplotter


please call Standard Horizon Marine Support 800-767-2450 and they will email you the manual.

marinetech@vxstdusa. com

Sep 10, 2010 | Standard Horizon CP155C GPS Receiver

1 Answer

Screen says c card invalid


Your best bet here would be to either head for a marine chandlery that handles these C-Cards and have them plug yours into one of their chartplotters or a vessel nearby that uses the same cartridge.

If your card works on theirs chartplotter, the problem lies within your CP150. If they get the same fault displayed as you do on your unit, for some reason the Card has a fault.

Hope this helps.

May 02, 2010 | Standard Horizon CP-150 WAAS GPS Receiver

1 Answer

Integrating AIS, Radar, Autohelm 7000 and flux gate compass.


ActiSense makes a programmable multiplexer that should do this for you. It is called an ActiSense NDC4 USB. Not sure is the Standard requires a separate compass signal, but if not, and the Standard can use a standard 38000 baud AIS data stream, the NDC4 will work for you. 847-746-0100
http://www.blueheronmarine.com/Actisense-NDC-4-USB-NMEA-0183-Multiplexer-with-USB-Port-6334

Jan 30, 2010 | Standard Horizon Cpv550 Gps Chartplotter...

2 Answers

Getting a fix status.


Did you try setting the time precisely for your location - then wait a minute?

Apr 30, 2007 | Standard Horizon CP170C GPS Receiver

Not finding what you are looking for?
Standard Horizon CP-150 WAAS GPS Receiver Logo

Related Topics:

653 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard Horizon GPS Experts

Steve
Steve

Level 3 Expert

693 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Standard Horizon GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...