Question about Kenmore Washing Machines

2 Answers

Kenmore series 70 washer will only fill with water.

Kenmore series 70 washer Model # 110. 247 12300 will fill with water but will not agitate. I have checked the switch and it still will not spin agitate or drain water. Any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I recently had this problem. It was found that the main drive belt broke and the washer would fill but not spin, agitate or drain. I replaced the belt and everything worked again. A defective or disconnected cover switch would also cause the same problem.

Posted on Jul 04, 2009

  • Sal DeAngelo Oct 19, 2011

    that's pretty amazing when this doesn't have a belt in it,it has a motor coupling

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 8,220 Answers

Must be a bad water level switch.

Posted on Jul 01, 2009

  • Elizabeth Snider
    Elizabeth Snider Mar 30, 2014

    where is this belt located? I"m trying to change it but can't find it?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 70 series washer fills w/H20, but doesn't agitate or spin


Fix it. Very easy fix and the part is not expensive. What you have is a direct drive motor. For ease of maintenance the machine is made in a way which makes it possible to service it in place without having to move it. You flip the controls up and pop the retaining clips in back, unplug the lid switch harness and tip the case towards you an out of the way. You can now access the pump, motor, and that pesky drive coupling. These do simply wear out but they usually will go if a comforter is washed in it or low water big load scenario.ea74271.jpg
I have videos repair manual,parts locaters and repair photos: HERE

Feb 14, 2010 | Washing Machines

1 Answer

Washer wont agitate or stop filling on any setting


Hello Friend, Just replace the water pressure/level switch. Replacement will make it fill correctly and agitate. Happy to help.

Nov 18, 2009 | Kenmore 24712 Top Load Washer

1 Answer

Kenmore 70 series filled and stopped...


Lid switch problem. Press down on lid and try to start machine. Reply.

Jun 15, 2009 | Kenmore 22422 Top Load Washer

1 Answer

My kenmore series 70 will not spin or drain the water out


open your washer put a screwdriver in the lid switch hole set the machine on spin tell me what happens be careful the tub should spin out the water

Apr 30, 2009 | Kenmore 23822 Top Load Washer

1 Answer

70 series kenmore washer won't agitate help model #82873120


No wash, no spin read THIS
Spins, pumps, won't agitate right: check THIS out

Mar 27, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Washer keeps filling with water...


you hae a stuck float switch, it shuts water off when it reaches a certain height, fixing it involes removing the top of the washer (not easily done)

Jan 11, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 80 Series will not fill up with water


if your washer will agitate when set to fill but not fill, then your pressure switch is bad.
also you may want to check and see if you are getting both hot and cold to your washer.

Nov 24, 2008 | Kenmore 24032\24036 Top Load Washer

8 Answers

Kenmore Washing Machine 70 series


You most likely have a broken coupler between the motor and gearcase.
You can buy the part for about $10 or have someone come out and replace it for about $150-200.
If you will post the complete model number from the the washer so I can see which style cabinet you have, I will try to walk you through the repair. It isn't very complicated if you are handy with home repairs.
With the age of the machine it probably just needs a coupler, but it could also have a problem in the transmission or basket drive that has caused the failure.

Nov 13, 2007 | Kenmore 22422 Top Load Washer

8 Answers

Kenmore 70 Series Washer


i have a kenmore 70 series washer model 10020722990
it will fill with water but will not wash. if you put it on spin the water will drain but it will not spin. it sounds like the motor turning. is it a clutch that has broken.

Sep 05, 2006 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...