Sanborn 34A50 air compressor builds pressure but will not shut off. How do I fix it or what do I adjust?
Comments:
Jul 27, 2009
- The problem turned out to be that the pressure adjustment switch was set too high. After downloading the manual, I was able to make the adjustment.
Thanks,
GH
I have a Hamworthy/Bristol 3S10-50 scuba air compressor. It gets to 100bar and then the 3rd stage...
(More)
I have a Hamworthy/Bristol 3S10-50 scuba air compressor. It gets to 100bar and then the 3rd stage over pressure valve leaks. The over pressure valve is set to 1000psi.I have cleaned the 3rd stage suction/delivery valve as well as the 2nd stage suction and delivery valves with no joy.
Any idea where next?
have a compressor that is powered by a vanguard 16 hp v twin manual engine that runs perfectly but...
(More)
have a compressor that is powered by a vanguard 16 hp v twin manual engine that runs perfectly but only for ten minutes at a time, any ideas